Description
Mimaki JV5 printers can use this set of two generic capping assys. The base, spring, and capping are all part of this high-quality capping assembly.
RE-640 Assy, Cap Top – 6000007135
$236.54Roland RE-640 printers are compatible with this cap top.
SKU: 6000007135
Manufacturer part number: 6000007135
Manufacturer: Roland
CX Series Guide Bearing Assy – 22175343AS
$509.56This GUIDE BEARING ASSY is suitable for Roland printers.
SKU: 22175343AS
Manufacturer part number: 22175343AS
Manufacturer: Roland
Mimaki / Roland / Mutoh Solvent Resistant Y Connector (ID: 2mm, OD: 3mm)
$15.08This Y connector with a solvent resistance helps connect three tubes with an ID of 2 mm and an OD of 3 mm.
SKU: PCNDI8747
Manufacturers: DIGIPRINT , Mutoh , Roland , Mimaki
Epson I3200 / I1600 capping unit
$48.54A wide range of Epson I3200/I1600 printhead-based DTF printers can use this generic capping unit.
SKU: PCAEP87856
Manufacturer part number: PCAEP87856
Manufacturers: DIGIPRINT , Epson
JV3-160SP Cap Slider 4H2 Assy – M007814
$266.18Mimaki JV3-160SP printers can use this capping station with four print heads.
SKU: PCAMIJV3002O
Manufacturer part number: M007814
Manufacturers: DIGIPRINT , Mimaki
Colorpainter 100S Capping Unit (100) – U00097303400
$3,355.36Seiko Colorpainter W series printers are compatible with this CV Capping Unit.
SKU: U00123067100
Manufacturer part number: U00123067100
Manufacturer: Oki
Related Products
CG1107 Assy, Main Board – 6000003126
$1,845.96This Assy, Main Board is suitable for Roland printers. This is the original Roland part (number 6000003126). Printer compatibility Roland GR-540 Roland GR-640 Roland GR-420 Product specifications Type Main Boards
Summa S Class Kit S(2) 120 Flat Cable – KIT-2030
$416.04This KIT FLATCABLES S120T is suitable for Summa S Class 12 cutters. This is the original Summa part (replacing part number 395-405).
Printer compatibility
Summa S-Class-120-T-Series
JV33 Y Drive Belt – M800982
$163.41Mimaki JV33 printers are compatible with this generic Y drive belt, which is also known as a carriage belt.
SKU: PBEMIJV3301S
Manufacturer part number: M800982
Manufacturers: Mimaki , DIGIPRINT
CJV300 Timing Belt – 100S2M210
$28.83Printers in the CJV300, CJV150, JV150, and JV300 series can use this timing belt.
SKU: 10379
Manufacturer part number: 100S2M210
Manufacturer: Mimaki
JV5 Bearing – F699ZZ
$4.93Mimaki JV5, JV33, and UJF-3042 printers are compatible with this generic bearing.
SKU: PMEMI18835
Manufacturer part number: F699ZZ
Manufacturers: Mimaki , DIGIPRINT
VJ-1604 CR Speed Reduction Belt – DF-43940
$56.70Mutoh Valuejet 1604 printers are compatible with this CR speed reduction belt. The original Mutoh component (DF-43940) can be found here. The circumference of this 10-millimeter-wide CR speed reduction belt is 240 millimeters.
SKU: PBEMUVJ6002
Manufacturer part number: DF-43940
Manufacturer: Mutoh
Reviews
There are no reviews yet.