Description
This waste bottle is compatible with Mimaki JFX, JV3, JV33, and CJV30 printers. The original component from Mimaki (SPA-0117, which replaces M005085).
CONNECTOR,SUPPLAY SECTION HY431 – 1000021806
$35.19This CONNECTOR,SUPPLAY SECTION HY431 is an original Roland part, suitable for a specific range of Roland printers.
SKU: 1000021806
Manufacturer part number: 1000021806
Manufacturer: Roland
LEJ-640 Adjuster, M12*60*103 – 1000009360
$61.17This Adjuster, M12*60*103 is suitable for Roland LEJ-640 printers. This is the original Roland part (number 1000009360).
SKU: 1000009360
Manufacturer part number: 1000009360
Manufacturer: Roland
JV150-160 F Seal Rubber 300H – M700734 (20pcs)
$63.19This set of 20 F seal rubbers is suitable for Mimaki printers.
SKU: PCN700734
Manufacturer part number: M700734
Manufacturers: Mimaki , DIGIPRINT
DC3 BEARING D=.5/.25 – MB0385
$24.39This BEARING D=.5/.25 is suitable for Summa DC3 printers. This is the original Summa part (partnumber MB0385).
SKU: MB0385
Manufacturer part number: MB0385
Manufacturer: Summa
Marabu Clearshield® Classic Lite – 5L – Semi-Gloss
$306.08Marabu Clearshield® Classic is a water-based liquid coating with a low viscosity that provides enhanced UV protection as well as chemical and abrasion resistance. can be applied with a brush, roller, or automated spray equipment or by hand. If you’re looking for a laminate with a lower viscosity, Classic Lite is an option that provides the same excellent protection as ClearShield Classic.
SKU: 360298812
Manufacturer part number: 360298812
Manufacturer: Marabu
Roland BELT 590P2M4 – 11929113
$61.38The manufacturer has discontinued this product. Please scroll down for more information below.
SKU: 11929113
Manufacturer part number: 11929113
Manufacturer: Roland
Related Products
JV5 Bearing – F699ZZ
$4.93Mimaki JV5, JV33, and UJF-3042 printers are compatible with this generic bearing.
SKU: PMEMI18835
Manufacturer part number: F699ZZ
Manufacturers: Mimaki , DIGIPRINT
Carriage Drive Timing Belt
$182.62Specific printers can use this carriage drive timing belt.
SKU: 88S3M312
Manufacturer: DIGIPRINT
AJ-1000 Assy, Pinch Org Board – W700105720
$69.44This Assy, Pinch Org Board is suitable for Roland AJ-1000 printers. This is the original Roland part (number W700105720).
Printer compatibility
Roland AJ-1000
Roland AJ-1000i
Roland AJ-740
Roland AJ-740i
Product specifications
XJ-640 Belt,150S2M2754LW-C – 1000003688
$644.02Roland XJ-640 printers can use this generic belt.
SKU: PBEROXJ6001O
Manufacturer part number: 1000003688
Manufacturers: DIGIPRINT , Roland
VP-540 L-Bearing, SSR15XW1GGE (Block only)
$302.13Several Roland printers are compatible with this bearing block, SSR15XW1GGE (see compatibility list below).
SKU: SSR 15 X W SS G
Manufacturer part number: 1000002145
Manufacturer: Roland
JV33 Y Drive Belt – M800982
$163.41Mimaki JV33 printers are compatible with this generic Y drive belt, which is also known as a carriage belt.
SKU: PBEMIJV3301S
Manufacturer part number: M800982
Manufacturers: Mimaki , DIGIPRINT
Reviews
There are no reviews yet.