Description
This LM Guide is suitable for Mimaki JV33-160 printers. This is the original Mimaki part (number SSR15xW2GE+2260LY).
Additional information
| Ink Type | Aqueous, Direct to Garment, DTF, Dye, Dye Sublimation, Eco-Solvent, Edible, Hard Solvent, Latex, Low Solvent, Mild Solvent, Pigment, UV, UV Curable |
|---|---|
| Printer Brand | Agfa, Brother, Canon, Epson, Fuji, Homer, HP, Kiaro, Kornit, Kyosera, Mimaki, Mutoh, Noritsu, NUR, Oce, Oki, Ricoh, Roland, Seiko, STS, Vutek |
| Printer Model | Jeti Titan 3020, Jeti Titan HS, Jeti Titan S |
| Printer Series | Jeti Mira Series, Jeti Tauro Series, Jeti Titen Series |
QS Series 4-Bolt Flange Bearing – P9181-A
$926.13This 4-Bolt Flange Bearing is suitable for EFI VUTEk QS-Series Printers.
SKU: SF 12 T 4 BOLT FLG
Manufacturer part number: P9181-A
Manufacturer: EFI
FJ-600 Capping Ink System – 12809371AS
$389.78The Roland FJ-600 and FJ-500 waterbased printers are compatible with this capping station and ink system assembly. Long-lasting performance is provided by this pump and cap top assembly, which is designed specifically for Roland printers and water-based inks. This is the genuine cap top for the Roland FJ600 (part number 12809371AS).
SKU: 12809371AS
Manufacturer part number: 12809371AS
Manufacturer: Roland
Mimaki / Roland / Mutoh Solvent Resistant Adapter
$4.57This solvent resistant adapter connects a tube of ID: 3mm OD: 4mm to a tube of ID: 2mm, OD: 3mm (o-ring included).
SKU: PADDI8755
Manufacturers: DIGIPRINT , Mutoh , Roland , Mimaki
CJ-540 Case, PE Bottle 5-038-03 – 11369122
$89.60Roland CJ-540 printers are compatible with this PE bottle.
SKU: 11369122
Manufacturer part number: 11369122
Manufacturer: Roland
CG-130FX Toothed Belt 130 – M800663
$66.95Mimaki CG-130 FX printers can use this generic toothed belt.
SKU: PBEMI_7577O
Manufacturer part number: M800663
Manufacturers: DIGIPRINT , Mimaki
Jetrix Male Luer Integral Lock Ring to 1/4-28 UNF Thread (20 pcs) – 00-AN00-86
$184.15This set of 20 Male Luer Integral Lock Rings to fit the Inktec Jetrix 3015FQ and 2513FRQ printers has a 1/4-28 UNF thread.
SKU: SMTLL-1/20
Manufacturer part number: 00-AN00-86
Manufacturers: Inktec , DIGIPRINT
Related Products
SJ-740 L-Bearing SSR15XW1UUE – 21895153 (Block only)
$306.56For some Roland printers, this generic bearing block, SSR15XW1UUE, is suitable.
SKU: PMERO17713
Manufacturer part number: 21895154
Manufacturers: Roland , DIGIPRINT
VP-540 L-Bearing, SSR15XW1GGE (Block only)
$302.13Several Roland printers are compatible with this bearing block, SSR15XW1GGE (see compatibility list below).
SKU: SSR 15 X W SS G
Manufacturer part number: 1000002145
Manufacturer: Roland
XJ-640 Belt,150S2M2754LW-C – 1000003688
$644.02Roland XJ-640 printers can use this generic belt.
SKU: PBEROXJ6001O
Manufacturer part number: 1000003688
Manufacturers: DIGIPRINT , Roland
CJV300 Timing Belt – 100S2M210
$28.83Printers in the CJV300, CJV150, JV150, and JV300 series can use this timing belt.
SKU: 10379
Manufacturer part number: 100S2M210
Manufacturer: Mimaki
VJ-1604 CR Speed Reduction Belt – DF-43940
$56.70Mutoh Valuejet 1604 printers are compatible with this CR speed reduction belt. The original Mutoh component (DF-43940) can be found here. The circumference of this 10-millimeter-wide CR speed reduction belt is 240 millimeters.
SKU: PBEMUVJ6002
Manufacturer part number: DF-43940
Manufacturer: Mutoh
JV3 Y Timing Belt – 150 S2M 380G
$11.39Mimaki JV3, JV33, and JV5 series printers are compatible with this generic speed reduction belt.
SKU: PBEMIJV305O
Manufacturer part number: 150 S2M 380G
Manufacturer: DIGIPRINT
Reviews
There are no reviews yet.