Description
A wide range of Epson I3200/I1600 printhead-based DTF printers can use this generic capping unit. The inlets for the capping fit ink tubes with an inner diameter of 2 mm. To connect to ink tubes with an inner diameter of 3 millimeters, the connector DC-2/20 must be added. When replacing the printhead, we recommend changing the capping units. One capping unit is required for each head. Please refer to the images to determine which capping will fit your printer. The list of related products at the bottom of this page includes additional cappings that are also suitable for DTF printers.
Roland BELT,200S2M1812LW-C – 1000016417
$1,651.15For Roland printers, this BELT,200S2M1812LW-C is suitable. The original Roland part (number 1000016417) can be found here.
SKU: 1000016417
Manufacturer part number: 1000016417
Manufacturer: Roland
Roland BELT,200S2M2066LW-C – 1000016321
$1,686.32This product has been discontinued by the manufacturer. Please continue reading for additional details.
SKU: 1000016321
Manufacturer part number: 1000016321
Manufacturer: Roland
Roland BELT,3*347K – 11929102
$63.66This product has been discontinued by the manufacturer. Please continue reading for additional details.
SKU: 11929102
Manufacturer part number: 11929102
Manufacturer: Roland
UJF-3042 Plug (20 pcs) – MTLLP-2
$72.98This set of 20 black nylon UV resistant male luer lock stoppers is suitable for Mimaki UJF-3042 printers.
SKU: MTLLP-2/20
Manufacturer part number: MTLLP-2
Manufacturer: Mimaki
Marabu ClearShield® Anti-Graffiti Part A, Gloss – 1 Gallon
$307.57Marabu Clearshield® Anti-Graffiti is a two-part, water-based liquid clear coat that protects any print from UV rays, resists chemicals and abrasion, and has unparalleled anti-graffiti properties. It is made to protect non-water-sensitive media like vinyl and banners printed with UV, solvent, and Latex inks from graffiti made with spray paint, latex paint, markers, and other materials.
SKU: 360259581
Manufacturer part number: 360259581
Manufacturer: Marabu
SummaCut BELT Y-MOTOR 140T, W=0.25 – MB9129
$28.83For SummaCut cutters, this BELT Y-MOTOR 140T, W=0.25 is suitable.
SKU: 007987
Manufacturer part number: MB9129
Manufacturer: Summa
Related Products
VJ-1604 CR Speed Reduction Belt – DF-43940
$56.70Mutoh Valuejet 1604 printers are compatible with this CR speed reduction belt. The original Mutoh component (DF-43940) can be found here. The circumference of this 10-millimeter-wide CR speed reduction belt is 240 millimeters.
SKU: PBEMUVJ6002
Manufacturer part number: DF-43940
Manufacturer: Mutoh
VJ-1604 Bearing – KY-14620
$4.57Mutoh Valuejet 1604 printers can use this generic bearing.
SKU: PMEMUVJ002O
Manufacturer part number: KY-14620
Manufacturers: DIGIPRINT , Mutoh
CJ-540 Belt, 408P2M4-530 – 11929138
$16.00Roland CJ-540 printers are compatible with this generic belt, 408P2M4-530.
SKU: 008055
Manufacturer part number: 11929138
Manufacturers: Roland , DIGIPRINT
QEH15SA L-Bearing (Block only)
$168.63Various Roland and Mimaki printers are compatible with this bearing block, QEH15SA.
SKU: QEH15SA
Manufacturer part number: QEH15SA
Manufacturers: Roland , Mimaki
REX-62 Connector 30P Cable – ECARC02-0005
$51.47This 30 pins connecting cable is suitable for DGI REX-62, VT and VTII series printers. This is the original DGI part (number ECARC02-0005 replacing number 1356067). It measures 1.83m long and connects from the main board to the connector board. Printer compatibility DGI REX-62 DGI VT-100D DGI VT-130D DGI VT-62 DGI VT-92 DGI VTII-62 DGI […]
JV33 Y Drive Belt – M800982
$254.72This product has been discontinued by the manufacturer. Please continue reading for additional details.
SKU: M800982
Manufacturer part number: M800982
Manufacturer: Mimaki
Reviews
There are no reviews yet.