Description
A wide range of Epson I3200/I1600 printhead-based DTF printers can use this generic capping unit. The inlets for the capping fit ink tubes with an inner diameter of 2 mm. To connect to ink tubes with an inner diameter of 3 millimeters, the connector DC-2/20 must be added. When replacing the printhead, we recommend changing the capping units. One capping unit is required for each head. Please refer to the images to determine which capping will fit your printer. The list of related products at the bottom of this page includes additional cappings that are also suitable for DTF printers.
Speed Reduction Belt – DG-49366
$190.76This Speed Reduction Belt is an original Mutoh part, suitable for a specific range of Mutoh printers.
SKU: DG-49366
Manufacturer part number: DG-49366
Manufacturer: Mutoh
Arizona 550 Belt-Drive Carriage – 3W3010108440
$2,191.37This Belt-Drive Carriage is suitable for Océ Arizona 550 GT / XT printers.
SKU: 3W3010108440
Manufacturer part number: 3010108440
Manufacturer: Canon Océ
BELT,244P2M4-530 – 1000007153
$91.03The manufacturer has discontinued this product. Please scroll down for more information below.
SKU: 1000007153
Manufacturer part number: 1000007153
Manufacturer: Roland
Ricoh IP5000 Damper, Head Ink (2 pcs) – VV12X1972
$16.82Ricoh IP5000 printers are compatible with this two-pack of generic Damper, Head Ink.
SKU: PDARI1972
Manufacturer part number: VV12X1972
Manufacturers: Ricoh , DIGIPRINT
Y Tube Fitting ID Tubing 1.6MM Nylon Black (20 pcs)
$72.98This set of twenty Y tube fittings made of black, solvent-resistant nylon is compatible with all wide format inkjet printers.
SKU: Y210-2/20
Manufacturer: DIGIPRINT
JFX Series Sub Tank Assy – M008554
$167.80This product has been discontinued by the manufacturer. Please scroll down for more information below.
SKU: M008554
Manufacturer part number: M008554
Manufacturer: Mimaki
Related Products
JV3 Y Timing Belt – 150 S2M 380G
$14.42Mimaki JV3, JV33, and JV5 series printers can use this generic speed reduction belt.
SKU: S2M-380-15MM
Manufacturer part number: 150 S2M 380G
Manufacturers: Mimaki , DIGIPRINT
VJ-1604 Steel Belt – DF-43937
$156.19Mutoh Valuejet 1604 printers are compatible with this generic, high-quality Steel Belt. This is the same generic part as the Mutoh part (DF-43937). This belt is 25 mm wide and 4750 mm long. Part number PBEMUVJ6001 is also available for the original Mutoh belt.
SKU: PBEMU13975
Manufacturer part number: DF-43937
Manufacturers: DIGIPRINT , Mutoh
SummaSign BELT X-MOTOR 110T,W=0.25 – MB9124
$28.83Summa SummaSign cutters are compatible with this BELT X-MOTOR 110T, W=0.25.
SKU: 007828
Manufacturer part number: MB9124
Manufacturer: Summa
JV33 Y Drive Belt – M800982
$163.41Mimaki JV33 printers are compatible with this generic Y drive belt, which is also known as a carriage belt.
SKU: PBEMIJV3301S
Manufacturer part number: M800982
Manufacturers: Mimaki , DIGIPRINT
AJ-1000 Assy, Main Board – 1000000559
$3,431.37This Assy, Main Board is suitable for Roland AJ-1000 printers. This is the original Roland part (number 1000000559). Printer compatibility Roland AJ-1000 Roland AJ-1000i Roland AJ-740 Roland AJ-740i Product specifications Type Main Boards
SJ-740 L-Bearing SSR15XW1UUE – 21895153 (Block only)
$306.56For some Roland printers, this generic bearing block, SSR15XW1UUE, is suitable.
SKU: PMERO17713
Manufacturer part number: 21895154
Manufacturers: Roland , DIGIPRINT
Reviews
There are no reviews yet.