Description
A wide range of Epson I3200/I1600 printhead-based DTF printers can use this generic capping unit. The inlets for the capping fit ink tubes with an inner diameter of 2 mm. To connect to ink tubes with an inner diameter of 3 millimeters, the connector DC-2/20 must be added. When replacing the printhead, we recommend changing the capping units. One capping unit is required for each head. Please refer to the images to determine which capping will fit your printer. The list of related products at the bottom of this page includes additional cappings that are also suitable for DTF printers.
SummaSign BELT X-MOTOR 110T,W=0.25 – MB9124
$28.83Summa SummaSign cutters are compatible with this BELT X-MOTOR 110T, W=0.25.
SKU: 007828
Manufacturer part number: MB9124
Manufacturer: Summa
Marabu Clearshield® Classic Lite – 5L – Semi-Gloss
$306.08Marabu Clearshield® Classic is a water-based liquid coating with a low viscosity that provides enhanced UV protection as well as chemical and abrasion resistance. can be applied with a brush, roller, or automated spray equipment or by hand. If you’re looking for a laminate with a lower viscosity, Classic Lite is an option that provides the same excellent protection as ClearShield Classic.
SKU: 360298812
Manufacturer part number: 360298812
Manufacturer: Marabu
Roland ADAPTER,KQ2N06-99 – 1000004013
$44.13The manufacturer has discontinued this product. Please continue reading for additional details.
SKU: 1000004013
Manufacturer part number: 1000004013
Manufacturer: Roland
CJ-540 Belt,166P2M4-530 – 21925137
$17.97Roland CJ-540 printers can use this generic belt.
SKU: 008006
Manufacturer part number: 21925137
Manufacturers: Roland , DIGIPRINT
CAP, APRON R – 1000020209
$15.84This CAP, APRON R is an original Roland part, suitable for a specific range of Roland printers.
SKU: 1000020209
Manufacturer part number: 1000020209
Manufacturer: Roland
JV34-260 Damper Joint Assy – M010793
$25.60This damper joint assy is suitable for Mimaki JV34-260 printers.
SKU: M010793
Manufacturer part number: M010793
Manufacturer: Mimaki
Related Products
CJV300 Timing Belt – 100S2M210
$28.83Printers in the CJV300, CJV150, JV150, and JV300 series can use this timing belt.
SKU: 10379
Manufacturer part number: 100S2M210
Manufacturer: Mimaki
JV33 Y Drive Belt – M800982
$254.72This product has been discontinued by the manufacturer. Please continue reading for additional details.
SKU: M800982
Manufacturer part number: M800982
Manufacturer: Mimaki
QEH15SA L-Bearing (Block only)
$168.63Various Roland and Mimaki printers are compatible with this bearing block, QEH15SA.
SKU: QEH15SA
Manufacturer part number: QEH15SA
Manufacturers: Roland , Mimaki
VP-540 L-Bearing, SSR15XW1GGE (Block only)
$302.13Several Roland printers are compatible with this bearing block, SSR15XW1GGE (see compatibility list below).
SKU: SSR 15 X W SS G
Manufacturer part number: 1000002145
Manufacturer: Roland
VJ-1604 Steel Belt – DF-43937
$156.19Mutoh Valuejet 1604 printers are compatible with this generic, high-quality Steel Belt. This is the same generic part as the Mutoh part (DF-43937). This belt is 25 mm wide and 4750 mm long. Part number PBEMUVJ6001 is also available for the original Mutoh belt.
SKU: PBEMU13975
Manufacturer part number: DF-43937
Manufacturers: DIGIPRINT , Mutoh
SummaSign BELT Y-MOTOR 150T – MB0380
$20.91Summa SummaSign cutters are compatible with this BELT Y-MOTOR 150T.
SKU: 004612
Manufacturer part number: MB0380
Manufacturer: Summa
Reviews
There are no reviews yet.