Description
A wide range of Epson XP600/TX800 printhead-based DTF printers can use this generic capping unit. The capping inlets fit ink tubes of an inner diameter of 2mm. To connect to ink tubes with an inner diameter of 3 millimeters, the connector DC-2/20 must be added. We recommend changing the capping units when replacing the printhead. One capping unit is required for each head. Please refer to the images to determine which capping will fit your printer. The list of related products at the bottom of this page includes additional cappings that are also suitable for DTF printers.
Jeti 3312 UNF Thread to Hose Barb connector 3mm ID Tubing (10 pcs)
$51.21This set of ten UNF Thread to Hose Barb connectors is used on the Jeti 3312 ink tank and is compatible with 3mm ID tubing. The original Agfa part is here. The inner diameter of this UNF Thread to Hose Barb connector is 2.41 millimeters, while the outer diameter is 3.30 millimeters.
SKU: PCNAG13439
Manufacturer: Agfa
Colorpainter 100S Steel Belt – U00097291100
$793.81This generic Steel Belt (100) Assy is suitable for Seiko Colorpainter 100S printers.
SKU: BE100291100
Manufacturer part number: U00097291100
Manufacturers: DIGIPRINT , Oki
VJ-2628TD Steel Belt – DG-40324
$324.80Mutoh Valuejet 2628TD printers are compatible with this steel belt. This is the original Mutoh part (number DG-40324). This Steel Belt is 693.5cm long and 2.5cm wide.
SKU: DG-40324
Manufacturer part number: DG-40324
Manufacturer: Mutoh
Roland ADAPTER,UT8 – 1000005121
$100.33The manufacturer has discontinued this product. Please continue reading for additional details.
SKU: 1000005121
Manufacturer part number: 1000005121
Manufacturer: Roland
FP-740 Adapter, Tube Joint I/S – 1000002765
$28.83The Roland FP-740 printers can use this Tube Joint I/S Adapter. The original Roland part in this case is number 1000002765.
SKU: 1000002765
Manufacturer part number: 1000002765
Manufacturer: Roland
PNC-1850 Drive Belt W20 – 22565120
$888.12The manufacturer has discontinued this product. Please continue reading for additional details.
SKU: 22565120
Manufacturer part number: 22565120
Manufacturer: Roland
Related Products
SummaSign BELT Y-MOTOR 150T – MB0380
$20.91Summa SummaSign cutters are compatible with this BELT Y-MOTOR 150T.
SKU: 004612
Manufacturer part number: MB0380
Manufacturer: Summa
JV3 Y Timing Belt – 150 S2M 380G
$11.39Mimaki JV3, JV33, and JV5 series printers are compatible with this generic speed reduction belt.
SKU: PBEMIJV305O
Manufacturer part number: 150 S2M 380G
Manufacturer: DIGIPRINT
QEH15CA L-Bearing (Block only)
$238.90Various Roland and Mimaki printers are compatible with this bearing block, QEH15CA.
SKU: QEH15CA
Manufacturer part number: QEH15CA
Manufacturers: Roland , Mimaki
VJ-1604 Steel Belt – DF-43937
$156.19Mutoh Valuejet 1604 printers are compatible with this generic, high-quality Steel Belt. This is the same generic part as the Mutoh part (DF-43937). This belt is 25 mm wide and 4750 mm long. Part number PBEMUVJ6001 is also available for the original Mutoh belt.
SKU: PBEMU13975
Manufacturer part number: DF-43937
Manufacturers: DIGIPRINT , Mutoh
AJ-1000 Assy, Pinch Org Board – W700105720
$69.44This Assy, Pinch Org Board is suitable for Roland AJ-1000 printers. This is the original Roland part (number W700105720).
Printer compatibility
Roland AJ-1000
Roland AJ-1000i
Roland AJ-740
Roland AJ-740i
Product specifications
Summa S Class Kit S(2) 120 Flat Cable – KIT-2030
$416.04This KIT FLATCABLES S120T is suitable for Summa S Class 12 cutters. This is the original Summa part (replacing part number 395-405).
Printer compatibility
Summa S-Class-120-T-Series
Reviews
There are no reviews yet.