Description
A wide range of Epson XP600/TX800 printhead-based DTF printers can use this generic capping unit. The capping inlets fit ink tubes of an inner diameter of 2mm. To connect to ink tubes with an inner diameter of 3 millimeters, the connector DC-2/20 must be added. We recommend changing the capping units when replacing the printhead. One capping unit is required for each head. Please refer to the images to determine which capping will fit your printer. The list of related products at the bottom of this page includes additional cappings that are also suitable for DTF printers.
TX300P CP PAD SET – SPA-0269
$238.16Mimaki printers with the TS300P and Tx300P models can use this CP Pad set.
SKU: SPA-0269
Manufacturer part number: SPA-0269
Manufacturer: Mimaki
Marabu ClearShield Classic Lite – 5L, Gloss
$287.41Marabu Clearshield® Classic is a water-based liquid coating with a low viscosity that provides enhanced UV protection as well as chemical and abrasion resistance. can be applied with a brush, roller, or automated spray equipment or by hand. If you’re looking for a laminate with a lower viscosity, Classic Lite is an option that provides the same excellent protection as ClearShield Classic.
SKU: 360298811
Manufacturer part number: 360298811
SP-300 Belt 520P2M4-530 – 11929139
$18.74Roland SP printers are compatible with the generic belt 520P2M4-530.
SKU: 008133
Manufacturer part number: 11929139
Manufacturers: Roland , DIGIPRINT
Straight Through Tube Fitting ID Tubing 3.2mm Nylon White (100pcs)
$343.30This set of 100 straight through tube fittings made of white nylon that resist solvents is compatible with all wide format inkjet printers.
SKU: CC-1
Manufacturer: DIGIPRINT
Arizona 250 Belt Gantry GT – 3W3010103684
$1,264.68This Belt Gantry GT is suitable for Océ Arizona 250 GT printers. This is the original Océ part (number 3010103684). This Belt Gantry GT is 385.6cm long and 3.8cm wide.
SKU: 3W3010103684
Manufacturer part number: 3010103684
Manufacturer: Canon Océ
JV5 Pulley Belt – 40S2M520
$26.23This Pulley Belt is suitable for Mimaki JV5 Series printers. This is the original Mimaki part (number 40S2M520). This Pulley Belt has a circumference of 51.4cm and is 0.4cm wide.
SKU: PBEMI11129
Manufacturer part number: 40S2M520
Manufacturer: Mimaki
Related Products
S Class 75 KIT FLATCABLES S75T – 395-403
$240.67This KIT FLATCABLES S75T is suitable for Summa S Class 75 cutters. This is the original Summa part (number 395-403).
Printer compatibility
Summa S-Class-75-T-Series
VP-540 L-Bearing, SSR15XW1GGE (Block only)
$302.13Several Roland printers are compatible with this bearing block, SSR15XW1GGE (see compatibility list below).
SKU: SSR 15 X W SS G
Manufacturer part number: 1000002145
Manufacturer: Roland
CG1107 Assy, Main Board – 6000003126
$1,845.96This Assy, Main Board is suitable for Roland printers. This is the original Roland part (number 6000003126). Printer compatibility Roland GR-540 Roland GR-640 Roland GR-420 Product specifications Type Main Boards
JV33 Y Drive Belt – M800982
$163.41Mimaki JV33 printers are compatible with this generic Y drive belt, which is also known as a carriage belt.
SKU: PBEMIJV3301S
Manufacturer part number: M800982
Manufacturers: Mimaki , DIGIPRINT
VJ-1604 Bearing – KY-14620
$4.57Mutoh Valuejet 1604 printers can use this generic bearing.
SKU: PMEMUVJ002O
Manufacturer part number: KY-14620
Manufacturers: DIGIPRINT , Mutoh
Summa S Class Kit S(2) 120 Flat Cable – KIT-2030
$416.04This KIT FLATCABLES S120T is suitable for Summa S Class 12 cutters. This is the original Summa part (replacing part number 395-405).
Printer compatibility
Summa S-Class-120-T-Series
Reviews
There are no reviews yet.