Description
A wide range of Epson XP600/TX800 printhead-based DTF printers can use this generic capping unit. The capping inlets fit ink tubes of an inner diameter of 2mm. To connect to ink tubes with an inner diameter of 3 millimeters, the connector DC-2/20 must be added. We recommend changing the capping units when replacing the printhead. One capping unit is required for each head. Please refer to the images to determine which capping will fit your printer. The list of related products at the bottom of this page includes additional cappings that are also suitable for DTF printers.
QS2000 Belt Timing HTD5 30FT – P5183-30.0
$2,424.33EFI VUTEk QS2000 Series printers can use this timing belt, which has a length of 9,14 meters (30 feet).
SKU: P5183-30.0
Manufacturer part number: P5183-30.0
Manufacturer: EFI
Marabu ClearShield® Anti-Graffiti Part B, Gloss – 16 oz
$109.47Marabu Clearshield® Anti-Graffiti is a two-part water-based liquid clear-coat that offers UV-protection, chemical resistance, abrasion resistance and unmatched anti-graffiti properties to any print. It is made to protect non-water-sensitive media like vinyl and banners printed with UV, solvent, and Latex inks from graffiti made with spray paint, latex paint, markers, and other materials.
SKU: 360256591
Manufacturer part number: 360256591
Manufacturer: Marabu
SC-550 X-Drive Belt – DE-44157
$62.48Cutting plotters such as the Mutoh Kona, SC, and Ultima can all use this X-drive Belt.
SKU: 013718
Manufacturer part number: DE-44157
Manufacturer: Mutoh
Arizona 6100 FTG Push 1/4 OD 5/32 ID TEE – 3W3010105241
$19.73Océ Arizona 6100 and Fujifilm Acuity F series printers work with this Fitting Push Tee. The original Océ component (number 3010105241) is here. The inner diameter of this fitting is 4mm (5/35″), while the outer diameter is 6.4mm (1/4″).
SKU: 3W3010105241
Manufacturer part number: 3010105241
Manufacturer: Canon Océ
CJ-70 Cap, Bottle PMP – 7520501000
$76.68This Cap, Bottle PMP is suitable for Roland printers.
SKU: 7520501000
Manufacturer part number: 7520501000
Manufacturer: Roland
Roland BELT 590P2M4 – 11929113
$61.38The manufacturer has discontinued this product. Please scroll down for more information below.
SKU: 11929113
Manufacturer part number: 11929113
Manufacturer: Roland
Related Products
QEH15SA L-Bearing (Block only)
$168.63Various Roland and Mimaki printers are compatible with this bearing block, QEH15SA.
SKU: QEH15SA
Manufacturer part number: QEH15SA
Manufacturers: Roland , Mimaki
VJ-1608HS CR Deceleration Belt Assy – DG-42458
$52.86Mutoh VJ-1608HS printers can use this generic CR Deceleration Belt Assy.
SKU: 011011
Manufacturer part number: DG-42458
Manufacturers: DIGIPRINT , Mutoh
VJ-1604 Steel Belt – DF-43937
$156.19Mutoh Valuejet 1604 printers are compatible with this generic, high-quality Steel Belt. This is the same generic part as the Mutoh part (DF-43937). This belt is 25 mm wide and 4750 mm long. Part number PBEMUVJ6001 is also available for the original Mutoh belt.
SKU: PBEMU13975
Manufacturer part number: DF-43937
Manufacturers: DIGIPRINT , Mutoh
VJ-1604 Steel Belt – DF-43937
$206.65Mutoh Valuejet 1604 printers are compatible with this steel belt.
SKU: DF-43937
Manufacturer part number: DF-43937
Manufacturer: Mutoh
Carriage Drive Timing Belt
$182.62Specific printers can use this carriage drive timing belt.
SKU: 88S3M312
Manufacturer: DIGIPRINT
JV33 Y Drive Belt – M800982
$163.41Mimaki JV33 printers are compatible with this generic Y drive belt, which is also known as a carriage belt.
SKU: PBEMIJV3301S
Manufacturer part number: M800982
Manufacturers: Mimaki , DIGIPRINT
Reviews
There are no reviews yet.