Description
A wide range of Epson XP600/TX800 printhead-based DTF printers can use this generic capping unit. The capping inlets fit ink tubes of an inner diameter of 2mm. To connect to ink tubes with an inner diameter of 3 millimeters, the connector DC-2/20 must be added. We recommend changing the capping units when replacing the printhead. One capping unit is required for each head. Please refer to the images to determine which capping will fit your printer. The list of related products at the bottom of this page includes additional cappings that are also suitable for DTF printers.
DC4 ASSY Y-BELT – 420-520
$507.49This ASSY Y-BELT is suitable for Summa DC4 printers. This is the original Summa part (partnumber 420-520).
SKU: 420-520
Manufacturer part number: 420-520
Manufacturer: Summa
Y Tube Fitting ID Tubing 1.6MM Nylon Black (20 pcs)
$72.98This set of twenty Y tube fittings made of black, solvent-resistant nylon is compatible with all wide format inkjet printers.
SKU: Y210-2/20
Manufacturer: DIGIPRINT
XF-640 Carton, Stand – 1000010326
$82.32This product has been discontinued by the manufacturer. Please scroll down for more information below.
SKU: 1000010326
Manufacturer part number: 1000010326
Manufacturer: Roland
XC-540 Carton, Accessory – 1000001639
$102.32The manufacturer has discontinued this product. Please scroll down for more information below.
SKU: 1000001639
Manufacturer part number: 1000001639
Manufacturer: Roland
RJ-8000 Ink ID Board Assy – DF-43968
$131.58This Ink ID Board Assy (Smart Chip reader) is suitable for Mutoh RJ-8000 (Falcon II) printers.
SKU: DF-43968
Manufacturer part number: DF-43968
Manufacturer: Mutoh
DIGIMEDIA Monomeric Gloss Overlaminate – 1524 mm x 50 m (60″ x 164′)
$251.42High-quality, self-adhesive 70 clear monomeric vinyl with UV protection and an acrylic-based, high-tack, permanent adhesive. This competitive calendered vinyl, which comes in gloss and matte finishes, is an excellent lamination for protecting digitally printed images. Easy to clean, this film can also be used as anti-graffiti protection. As low as €1.05 per square meter.
SKU: DLMG60
Manufacturer part number: DLMG60
Manufacturer: DIGIPRINT
Related Products
Carriage Drive Timing Belt
$182.62Specific printers can use this carriage drive timing belt.
SKU: 88S3M312
Manufacturer: DIGIPRINT
CJ-540 Belt, 408P2M4-530 – 11929138
$16.00Roland CJ-540 printers are compatible with this generic belt, 408P2M4-530.
SKU: 008055
Manufacturer part number: 11929138
Manufacturers: Roland , DIGIPRINT
VJ-1604 CR Speed Reduction Belt – DF-43940
$56.70Mutoh Valuejet 1604 printers are compatible with this CR speed reduction belt. The original Mutoh component (DF-43940) can be found here. The circumference of this 10-millimeter-wide CR speed reduction belt is 240 millimeters.
SKU: PBEMUVJ6002
Manufacturer part number: DF-43940
Manufacturer: Mutoh
JV5 Bearing – F699ZZ
$4.93Mimaki JV5, JV33, and UJF-3042 printers are compatible with this generic bearing.
SKU: PMEMI18835
Manufacturer part number: F699ZZ
Manufacturers: Mimaki , DIGIPRINT
CG1107 Assy, Main Board – 6000003126
$1,845.96This Assy, Main Board is suitable for Roland printers. This is the original Roland part (number 6000003126). Printer compatibility Roland GR-540 Roland GR-640 Roland GR-420 Product specifications Type Main Boards
SummaSign BELT Y-MOTOR 150T – MB0380
$20.91Summa SummaSign cutters are compatible with this BELT Y-MOTOR 150T.
SKU: 004612
Manufacturer part number: MB0380
Manufacturer: Summa
Reviews
There are no reviews yet.