Description
A wide range of Epson XP600/TX800 printhead-based DTF printers can use this generic capping unit. The capping inlets fit ink tubes of an inner diameter of 2mm. To connect to ink tubes with an inner diameter of 3 millimeters, the connector DC-2/20 must be added. We recommend changing the capping units when replacing the printhead. One capping unit is required for each head. Please refer to the images to determine which capping will fit your printer. The list of related products at the bottom of this page includes additional cappings that are also suitable for DTF printers.
Neo Titan Hose Elbow Secondary Tanks – 7300104-0008
$20.70The secondary ink tanks of the Dilli Neo Titan 1604D series printers are attached with this Hose Elbow.
SKU: M-5HL-6
Manufacturer part number: 7300104-0008
Manufacturer: Dilli
GS Series Fitting Luer 3/32 Female (20 pcs) – P2122-A
$83.40This set of 20 Fitting Luer 3/32 Female is suitable for VUTEk GS-Series printers.
SKU: FTL220-1/20
Manufacturer part number: P2122-A
Manufacturer: EFI
1,5L Ink Tank – DG-48848
$335.62This original 1,5L Mutoh ink tank is compatible with a specific Mutoh printer line.
SKU: DG-48848
Manufacturer part number: DG-48848
Manufacturer: Mutoh
Marabu ClearShield Classic – 20L, Gloss
$1,045.79Marabu Clearshield® Classic is a high-viscosity water-based liquid coating for enhanced UV-protection, chemical and abrasion resistance. For use on most non-water sensitive materials. can be applied by hand using a brush or roller. Of all the formulations, ClearShield Classic has the highest film build. It works well for banners, vinyl, and vertical applications.
SKU: 360299911
Manufacturer part number: 360299911
Manufacturer: Marabu
AJ-1000 CONNECTOR – 13439263
$3.52The manufacturer has discontinued this product. Please scroll down for more information below.
SKU: 13439263
Manufacturer part number: 13439263
Manufacturer: Roland
VJ-426UF I/C Holder Exchange Kit – DG-45277
$1,750.78This I/C Holder Exchange Kit is suitable for Mutoh Valuejet 426UF printers.
SKU: DG-45277
Manufacturer part number: DG-45277
Manufacturer: Mutoh
Related Products
S Class 75 KIT FLATCABLES S75T – 395-403
$240.67This KIT FLATCABLES S75T is suitable for Summa S Class 75 cutters. This is the original Summa part (number 395-403).
Printer compatibility
Summa S-Class-75-T-Series
Summa S Class Kit S(2) 120 Flat Cable – KIT-2030
$416.04This KIT FLATCABLES S120T is suitable for Summa S Class 12 cutters. This is the original Summa part (replacing part number 395-405).
Printer compatibility
Summa S-Class-120-T-Series
CG1107 Assy, Main Board – 6000003126
$1,845.96This Assy, Main Board is suitable for Roland printers. This is the original Roland part (number 6000003126). Printer compatibility Roland GR-540 Roland GR-640 Roland GR-420 Product specifications Type Main Boards
SummaSign BELT X-MOTOR 110T,W=0.25 – MB9124
$28.83Summa SummaSign cutters are compatible with this BELT X-MOTOR 110T, W=0.25.
SKU: 007828
Manufacturer part number: MB9124
Manufacturer: Summa
Carriage Drive Timing Belt
$182.62Specific printers can use this carriage drive timing belt.
SKU: 88S3M312
Manufacturer: DIGIPRINT
JV33 Y Drive Belt – M800982
$163.41Mimaki JV33 printers are compatible with this generic Y drive belt, which is also known as a carriage belt.
SKU: PBEMIJV3301S
Manufacturer part number: M800982
Manufacturers: Mimaki , DIGIPRINT
Reviews
There are no reviews yet.