Description
Roland FJ printers can use this standard R-Bearing. It is the same as the original Roland part, which has the number 22175815-00. With the exception of the flange, this Bearing has an outer diameter of 16 mm and an inner diameter of 8 mm. The width is 5 mm.
Rho Fitting ABSML-6-07 Red – 1342803
$5.62This Male Luer with Rotating Lock Ring in red natural polypropylene is suitable for the Durst Rho printers.
SKU: ABSML-6005-3
Manufacturer part number: 1342803
Manufacturer: Durst
JV150-160 F Seal Rubber 300H – M700734 (20pcs)
$63.19This set of 20 F seal rubbers is suitable for Mimaki printers.
SKU: PCN700734
Manufacturer part number: M700734
Manufacturers: Mimaki , DIGIPRINT
JV5 Y joint 1-2D – M601888
$5.17This Mimaki Y joint 1-2D is suitable for JV5 printers.
SKU: M601888
Manufacturer part number: M601888
Manufacturer: Mimaki
Straight Through Reduction Tube Fitting ID Tubing 3.2mm to 2.4mm Nylon Black (20 pcs)
$87.67This set of 20 solvent resistant black nylon straight through tube fitting is suitable for all wide format inkjet printers printers.
SKU: DC-2/20
Manufacturer: DIGIPRINT
Mimaki / Roland / Mutoh Solvent Resistant Y Connector (ID: 2mm, OD: 3mm)
$15.08This Y connector with a solvent resistance helps connect three tubes with an ID of 2 mm and an OD of 3 mm.
SKU: PCNDI8747
Manufacturers: DIGIPRINT , Mutoh , Roland , Mimaki
Roland R-BEARING,JIS 6000ZZ(B8) NMB – 1000011821
$32.68This product has been discontinued by the manufacturer. Please continue reading for additional details.
SKU: 1000011821
Manufacturer part number: 1000011821
Manufacturer: Roland
Related Products
JV3 Y Timing Belt – 150 S2M 380G
$11.39Mimaki JV3, JV33, and JV5 series printers are compatible with this generic speed reduction belt.
SKU: PBEMIJV305O
Manufacturer part number: 150 S2M 380G
Manufacturer: DIGIPRINT
CJ-540 Belt, 408P2M4-530 – 11929138
$16.00Roland CJ-540 printers are compatible with this generic belt, 408P2M4-530.
SKU: 008055
Manufacturer part number: 11929138
Manufacturers: Roland , DIGIPRINT
JV33 Y Drive Belt – M800982
$163.41Mimaki JV33 printers are compatible with this generic Y drive belt, which is also known as a carriage belt.
SKU: PBEMIJV3301S
Manufacturer part number: M800982
Manufacturers: Mimaki , DIGIPRINT
QEH15SA L-Bearing (Block only)
$168.63Various Roland and Mimaki printers are compatible with this bearing block, QEH15SA.
SKU: QEH15SA
Manufacturer part number: QEH15SA
Manufacturers: Roland , Mimaki
VJ-1608HS CR Deceleration Belt Assy – DG-42458
$52.86Mutoh VJ-1608HS printers can use this generic CR Deceleration Belt Assy.
SKU: 011011
Manufacturer part number: DG-42458
Manufacturers: DIGIPRINT , Mutoh
CG1107 Assy, Main Board – 6000003126
$1,845.96This Assy, Main Board is suitable for Roland printers. This is the original Roland part (number 6000003126). Printer compatibility Roland GR-540 Roland GR-640 Roland GR-420 Product specifications Type Main Boards
Reviews
There are no reviews yet.