The VUTEk QS- and GS-Series printers are compatible with this set of ten Fitting Luer Male.170. These connectors have a male ISO Luer lock on one side and an 4.3mm (0.17 inch) tube hose barb on the other side. P4812-A is the original VUTEk component.
For Roland LEJ-640 printers, this set of 20 adapters, Junction VZY430 BK is suitable.
SKU: Y430-2/20
Manufacturer part number: 1000006316
Manufacturers: Roland , DIGIPRINT
This X Drive Belt is an original Mutoh part, suitable for a specific range of Mutoh printers.
SKU: DG-48833
Manufacturer part number: DG-48833
Manufacturer: Mutoh
Mimaki JV33 printers are compatible with this complete capping station.
SKU: M007389
Manufacturer part number: M007389
Manufacturer: Mimaki
This CR Deceleration Belt Assy is suitable for Mutoh VJ-1608HS printers.
SKU: PBEMUVA12181
Manufacturer part number: DG-42458
Manufacturer: Mutoh
Mimaki JV33 printers can use this box of ten generic cap pads.
SKU: PCAMIJV3302O2
Manufacturer part number: SPA-0161
Manufacturers: DIGIPRINT , Mimaki
Mimaki TX2-1600 printers are compatible with this Hose Joint. The outer diameter of this Hose Joint is 34.1mm, while the inner diameter is 19.05mm. This is original Mimaki part (number M601138).
SKU: M601138
Manufacturer part number: M601138
Manufacturer: Mimaki
This Assy, Pinch Org Board is suitable for Roland AJ-1000 printers. This is the original Roland part (number W700105720).
Printer compatibility
Roland AJ-1000
Roland AJ-1000i
Roland AJ-740
Roland AJ-740i
Product specifications
Roland CJ-540 printers are compatible with this generic belt, 408P2M4-530.
SKU: 008055
Manufacturer part number: 11929138
Manufacturers: Roland , DIGIPRINT
For some Roland printers, this generic bearing block, SSR15XW1UUE, is suitable.
SKU: PMERO17713
Manufacturer part number: 21895154
Manufacturers: Roland , DIGIPRINT
This 30 pins connecting cable is suitable for DGI REX-62, VT and VTII series printers. This is the original DGI part (number ECARC02-0005 replacing number 1356067). It measures 1.83m long and connects from the main board to the connector board. Printer compatibility DGI REX-62 DGI VT-100D DGI VT-130D DGI VT-62 DGI VT-92 DGI VTII-62 DGI […]
This Assy, Main Board is suitable for Roland AJ-1000 printers. This is the original Roland part (number 1000000559). Printer compatibility Roland AJ-1000 Roland AJ-1000i Roland AJ-740 Roland AJ-740i Product specifications Type Main Boards
Mutoh VJ-1608HS printers can use this generic CR Deceleration Belt Assy.
SKU: 011011
Manufacturer part number: DG-42458
Manufacturers: DIGIPRINT , Mutoh
Select at least 2 products
to compare
Reviews
There are no reviews yet.