Description
This Mini T-shaped One Touch Fitting is suitable for Inktec Jetrix 3015FQ & Jetrix 2513FRQ printers. This is the first Inktec component. Inner diameter is 0.6cm wide and outer diameter is 1cm wide.
Marabu ClearShield® Anti-Graffiti Part A, Gloss – 1 Gallon
$307.57Marabu Clearshield® Anti-Graffiti is a two-part, water-based liquid clear coat that protects any print from UV rays, resists chemicals and abrasion, and has unparalleled anti-graffiti properties. It is made to protect non-water-sensitive media like vinyl and banners printed with UV, solvent, and Latex inks from graffiti made with spray paint, latex paint, markers, and other materials.
SKU: 360259581
Manufacturer part number: 360259581
Manufacturer: Marabu
AJ-1000 Assy, Pinch Org Board – W700105720
$69.44This Assy, Pinch Org Board is suitable for Roland AJ-1000 printers. This is the original Roland part (number W700105720).
Printer compatibility
Roland AJ-1000
Roland AJ-1000i
Roland AJ-740
Roland AJ-740i
Product specifications
VJ-1938 Steel Belt 74 Assy – DG-45268
$187.44Mutoh printers can use this VJ-1938 Steel Belt 74 Assy – DG-45268. This is the original Mutoh component (number DG-45268).
SKU: DG-45268
Manufacturer part number: DG-45268
Manufacturer: Mutoh
Roland BELT,50S2M575LW-C – 1000014691
$228.52Roland printers are compatible with this BELT,50S2M575LW-C. The original Roland part (number 1000014691) is here.
SKU: 1000014691
Manufacturer part number: 1000014691
Manufacturer: Roland
SummaCut BELT X-MOTOR 87T – MB0315
$26.43SummaCut cutters can use this BELT X-MOTOR 87T.
SKU: 008926
Manufacturer part number: MB0315
Manufacturer: Summa
CAP, APRON L – 1000020210
$15.84This original Roland part, CAP, APRON L, is compatible with a specific range of Roland printers.
SKU: 1000020210
Manufacturer part number: 1000020210
Manufacturer: Roland
Related Products
JV3 Y Timing Belt – 150 S2M 380G
$14.42Mimaki JV3, JV33, and JV5 series printers can use this generic speed reduction belt.
SKU: S2M-380-15MM
Manufacturer part number: 150 S2M 380G
Manufacturers: Mimaki , DIGIPRINT
VJ-1608HS CR Deceleration Belt Assy – DG-42458
$52.86Mutoh VJ-1608HS printers can use this generic CR Deceleration Belt Assy.
SKU: 011011
Manufacturer part number: DG-42458
Manufacturers: DIGIPRINT , Mutoh
SummaSign BELT Y-MOTOR 150T – MB0380
$20.91Summa SummaSign cutters are compatible with this BELT Y-MOTOR 150T.
SKU: 004612
Manufacturer part number: MB0380
Manufacturer: Summa
VP-540 L-Bearing, SSR15XW1GGE (Block only)
$302.13Several Roland printers are compatible with this bearing block, SSR15XW1GGE (see compatibility list below).
SKU: SSR 15 X W SS G
Manufacturer part number: 1000002145
Manufacturer: Roland
REX-62 Connector 30P Cable – ECARC02-0005
$51.47This 30 pins connecting cable is suitable for DGI REX-62, VT and VTII series printers. This is the original DGI part (number ECARC02-0005 replacing number 1356067). It measures 1.83m long and connects from the main board to the connector board. Printer compatibility DGI REX-62 DGI VT-100D DGI VT-130D DGI VT-62 DGI VT-92 DGI VTII-62 DGI […]
Carriage Drive Timing Belt
$182.62Specific printers can use this carriage drive timing belt.
SKU: 88S3M312
Manufacturer: DIGIPRINT
Reviews
There are no reviews yet.