Description
This Mini T-shaped One Touch Fitting is suitable for Inktec Jetrix 3015FQ & Jetrix 2513FRQ printers. This is the first Inktec component. Inner diameter is 0.6cm wide and outer diameter is 1cm wide.
BELT,SCAN AJ-740 – 1000003529
$1,515.18The manufacturer has discontinued this product. Please continue reading for additional details.
SKU: 1000003529
Manufacturer part number: 1000003529
Manufacturer: Roland
Arizona 360 GT Belt Flat M 50.8X0.127X8664 301SS – 3010117454
$2,085.84Océ Arizona 360 GT printers are compatible with this flat belt.
SKU: 3010117454
Manufacturer part number: 3010117454
Mimaki / Roland / Mutoh Solvent Resistant Y Connector (ID: 2mm, OD: 3mm)
$15.08This Y connector with a solvent resistance helps connect three tubes with an ID of 2 mm and an OD of 3 mm.
SKU: PCNDI8747
Manufacturers: DIGIPRINT , Mutoh , Roland , Mimaki
CJV300 Timing Belt – 100S2M210
$28.83Printers in the CJV300, CJV150, JV150, and JV300 series can use this timing belt.
SKU: 10379
Manufacturer part number: 100S2M210
Manufacturer: Mimaki
DC3 BEARING D=.5/.25 – MB0385
$24.39This BEARING D=.5/.25 is suitable for Summa DC3 printers. This is the original Summa part (partnumber MB0385).
SKU: MB0385
Manufacturer part number: MB0385
Manufacturer: Summa
Roland L-BEARING,RSR9WVUUC1S+420LMGS – 11899114GS
$790.20The manufacturer has discontinued this product. Please scroll down for more information below.
SKU: 11899114GS
Manufacturer part number: 11899114GS
Manufacturer: Roland
Related Products
AJ-1000 Assy, Pinch Org Board – W700105720
$69.44This Assy, Pinch Org Board is suitable for Roland AJ-1000 printers. This is the original Roland part (number W700105720).
Printer compatibility
Roland AJ-1000
Roland AJ-1000i
Roland AJ-740
Roland AJ-740i
Product specifications
SummaSign BELT X-MOTOR 110T,W=0.25 – MB9124
$28.83Summa SummaSign cutters are compatible with this BELT X-MOTOR 110T, W=0.25.
SKU: 007828
Manufacturer part number: MB9124
Manufacturer: Summa
Summa S Class Kit S(2) 120 Flat Cable – KIT-2030
$416.04This KIT FLATCABLES S120T is suitable for Summa S Class 12 cutters. This is the original Summa part (replacing part number 395-405).
Printer compatibility
Summa S-Class-120-T-Series
Carriage Drive Timing Belt
$182.62Specific printers can use this carriage drive timing belt.
SKU: 88S3M312
Manufacturer: DIGIPRINT
CG1107 Assy, Main Board – 6000003126
$1,845.96This Assy, Main Board is suitable for Roland printers. This is the original Roland part (number 6000003126). Printer compatibility Roland GR-540 Roland GR-640 Roland GR-420 Product specifications Type Main Boards
CJ-540 Belt, 408P2M4-530 – 11929138
$16.00Roland CJ-540 printers are compatible with this generic belt, 408P2M4-530.
SKU: 008055
Manufacturer part number: 11929138
Manufacturers: Roland , DIGIPRINT
Reviews
There are no reviews yet.