Description
Mimaki printers JF-1610 and JF-1631 can use this belt. This is the original Mimaki part (number 200S3M339UG). This belt has a width of 20 mm and a circumference of 339 mm.
JV4 Belt – 250-TN15-10
$60.91This belt M.250-TN15-10 is suitable for Mimaki JV4 / TX2 printers.
SKU: 092123
Manufacturer part number: 250-TN15-10
Manufacturer: Mimaki
FJ-540 Case Cap Top – 21365121
$12.59Roland printers are suitable for this cap-top case.
SKU: 21365121
Manufacturer part number: 21365121
Manufacturer: Roland
Arizona 6100 Housing Radial Bearing – 3W3010114945
$239.97This Housing Radial Bearing is suitable for Océ Arizona 6100 and Fujifilm Acuity F series printers. This is the original Océ part (number 3010114945).
SKU: 3W3010114945
Manufacturer part number: 3010114945
Manufacturer: Canon Océ
Colorpainter V-64s Belt – U00100687400
$135.79This steel Belt is suitable for Seiko Colorpainter V-64S & W-64s printers.
SKU: U00100687400
Manufacturer part number: U00100687400
Manufacturer: Oki
Marabu ClearShield® Anti-Graffiti Part A, Gloss – 1 Quart
$142.91Marabu Clearshield® Anti-Graffiti is a two-part, water-based liquid clear coat that protects any print from UV rays, resists chemicals and abrasion, and has unparalleled anti-graffiti properties. It is made to protect non-water-sensitive media like vinyl and banners printed with UV, solvent, and Latex inks from graffiti made with spray paint, latex paint, markers, and other materials.
SKU: 360264581
Manufacturer part number: 360264581
Manufacturer: Marabu
Marabu ClearShield Classic Lite – 1L, Gloss
$76.53Marabu Clearshield® Classic is a water-based liquid coating with a low viscosity that provides enhanced UV protection as well as chemical and abrasion resistance. can be applied with a brush, roller, or automated spray equipment or by hand. If you’re looking for a laminate with a lower viscosity, Classic Lite is an option that provides the same excellent protection as ClearShield Classic.
SKU: 360297811
Manufacturer part number: 360297811
Manufacturer: Marabu
Related Products
CJV300 Timing Belt – 100S2M210
$28.83Printers in the CJV300, CJV150, JV150, and JV300 series can use this timing belt.
SKU: 10379
Manufacturer part number: 100S2M210
Manufacturer: Mimaki
VJ-1604 Steel Belt – DF-43937
$156.19Mutoh Valuejet 1604 printers are compatible with this generic, high-quality Steel Belt. This is the same generic part as the Mutoh part (DF-43937). This belt is 25 mm wide and 4750 mm long. Part number PBEMUVJ6001 is also available for the original Mutoh belt.
SKU: PBEMU13975
Manufacturer part number: DF-43937
Manufacturers: DIGIPRINT , Mutoh
CJ-540 Belt, 408P2M4-530 – 11929138
$16.00Roland CJ-540 printers are compatible with this generic belt, 408P2M4-530.
SKU: 008055
Manufacturer part number: 11929138
Manufacturers: Roland , DIGIPRINT
VP-540 L-Bearing, SSR15XW1GGE (Block only)
$302.13Several Roland printers are compatible with this bearing block, SSR15XW1GGE (see compatibility list below).
SKU: SSR 15 X W SS G
Manufacturer part number: 1000002145
Manufacturer: Roland
SJ-740 L-Bearing SSR15XW1UUE – 21895153 (Block only)
$306.56For some Roland printers, this generic bearing block, SSR15XW1UUE, is suitable.
SKU: PMERO17713
Manufacturer part number: 21895154
Manufacturers: Roland , DIGIPRINT
SummaSign BELT X-MOTOR 110T,W=0.25 – MB9124
$28.83Summa SummaSign cutters are compatible with this BELT X-MOTOR 110T, W=0.25.
SKU: 007828
Manufacturer part number: MB9124
Manufacturer: Summa
Reviews
There are no reviews yet.