Description
Marabu Clearshield® Classic is a water-based liquid clear-coat that offers UV-protection, chemical resistance, abrasion resistance and flexibility to any print. All solvent, eco-solvent, latex, and UV inks can be used with ClearShield® Classic, which is designed to be used with a wide variety of non-water-sensitive media like banners and self-adhesive vinyl.
Benefits :
ClearShield® liquid coatings offer the same protection as film laminates while saving as much as 60% in production costs. Liquid coating is easy to use and does not require expensive equipments. In contrast to lamination films, there is no risk of bubbling or misalignment with liquid coating.
Specifications :
Product type : Water based liquid coating
Durability: 5-7 years outdoor with UV Curable inks
Finish : Gloss, Semi-Gloss or Matt
Viscosity : Shell Cup #3 30-35 sec
VOC : 48g/L
PH : 8.5 -9.0
Application : Short-Nap roller or High Density Foam Roller
Ink compatibility : Solvent and UV inks.
Media compatibilty : adhesive vinyl, banners
Coverage of 1L : around 14-15m2 with Roller
Applications :
Banners
Billboards
Canvas Prints
Signage
Wall covering
Vehicle Graphics
Application Method :
Manual application : Roll the clearshield coating onto the prints using a short-nap roller or a white high-density foam roller. Apply two layers, waiting approximately an hour in-between to complete drying.
Products available :
ClearShield® Classic Gloss – 1L – 360297911
ClearShield® Classic Gloss – 5L – 360298911
ClearShield® Classic Semi Gloss – 1L – 360297912
ClearShield® Classic Semi Gloss – 5L – 360298912
ClearShield® Classic Matte ++ – 1L – 360297924
ClearShield® Classic Matte ++ – 5L – 360298924
Jeti Female Luer to Hose Barb Connector 3mm ID Tubing (100 pcs)
$325.23This set of 100 Female Luer to Hose Barb connectors is suitable for 3mm ID tubing and is used on the Jeti ink tank.
SKU: FTLL230/6005
Manufacturer: Agfa
FP-740 Carton, Support Media TU-750 – 22605117
$13.57This product has been discontinued by the manufacturer. Please scroll down for more information below.
SKU: 22605117
Manufacturer part number: 22605117
Manufacturer: Roland
SummaSign / SummaCut Motor – KIT-1042
$1,725.47This kit is suitable for SummaSign and SummaCut Series.
SKU: KIT-1042
Manufacturer part number: KIT-1042
Manufacturer: Summa
Roland BELT,100S2M763LW-C – 1000012575
$263.18This BELT,100S2M763LW-C is suitable for Roland printers. This is the original Roland part (number 1000012575).
SKU: 1000012575
Manufacturer part number: 1000012575
Manufacturer: Roland
QS Series FS Kit, Purge Wiper, Suction Block – 45066759
$131.76The VUTEk QS series of printers are compatible with this generic PURGE WIPER, SUCTION BLOCK.
SKU: PCAVU13089O
Manufacturer part number: 45066759
Manufacturers: DIGIPRINT , EFI
CX-24 Belt, 1526P2M6 – 11929116
$78.18Picture of CX-24 Belt, 1526P2M6 – 11929116Picture of CX-24 Belt, 1526P2M6 – 11929116Picture of CX-24 Belt, 1526P2M6 – 11929116
The Roland CX-24 and GX-24 cutting plotters are compatible with this belt. This is the original Roland part (number 11929116). This belt has a circumference of 151.8cm and is 0.6cm wide.
SKU: 11929116
Manufacturer part number: 11929116
Manufacturer: Roland
Related Products
DIGIMEDIA Monomeric Matte Overlaminate – 1060 mm x 50 m (42″ x 164′)
$164.50
DIGIMEDIA Monomeric Gloss Overlaminate – 1600 mm x 50 m (63″ x 164′)
$277.82High-quality, self-adhesive 70 clear monomeric vinyl with UV protection and an acrylic-based, high-tack, permanent adhesive. This competitive calendered vinyl, which comes in gloss and matte finishes, is an excellent lamination for protecting digitally printed images. Easy to clean, this film can also be used as anti-graffiti protection. As low as €1.05 per square meter
SKU: DLMG63
Manufacturer part number: DLMG63
Distributor: DIGIPRINT
Marabu ClearShield® Anti-Graffiti Part A, Gloss – 1 Gallon
$307.57Marabu Clearshield® Anti-Graffiti is a two-part, water-based liquid clear coat that protects any print from UV rays, resists chemicals and abrasion, and has unparalleled anti-graffiti properties. It is made to protect non-water-sensitive media like vinyl and banners printed with UV, solvent, and Latex inks from graffiti made with spray paint, latex paint, markers, and other materials.
SKU: 360259581
Manufacturer part number: 360259581
Manufacturer: Marabu
DIGIMEDIA Polymeric Gloss Overlaminate – 1372 mm x 50 m (54″ x 164′)
$343.97
DIGIMEDIA Monomeric Matte Overlaminate – 1372 mm x 50 m (54″ x 164′)
$227.50
Marabu ClearJet Original Type A2000, Gloss – 12 oz Spray Can
$45.15Protecting your prints, fine art, signs, banners, photographic output, awnings, and other products from UV rays, abrasion, and marring is simple and affordable with Marabu ClearJet®.
SKU: 360363001
Manufacturer part number: 360363001
Manufacturer: Marabu
Reviews
There are no reviews yet.