Description
Marabu Clearshield® Classic is a water-based liquid clear-coat that offers UV-protection, chemical resistance, abrasion resistance and flexibility to any print. ClearShield® Classic is formulated for use with a wide range of non-water-sensitive media such as banner or self-adhesive vinyl and all solvent, eco-solvent, Latex and UV inks
Benefits :
ClearShield® liquid coatings offer the same protection as film laminates while saving as much as 60% in production costs. Liquid coating is easy to use and does not require expensive equipments. In contrast to lamination films, there is no risk of bubbling or misalignment with liquid coating.
Specifications :
Product type : Water based liquid coating
Durability: 5-7 years outdoor with UV Curable inks
Finish : Gloss, Semi-Gloss or Matt
Viscosity : Shell Cup #3 30-35 sec
VOC : 48g/L
PH : 8.5 -9.0
Application : Short-Nap roller or High Density Foam Roller
Ink compatibility : Solvent and UV inks.
Media compatibilty : adhesive vinyl, banners
Coverage of 1L : around 14-15m2 with Roller
Applications :
Banners
Billboards
Canvas Prints
Signage
Wall covering
Vehicle Graphics
Application Method :
Manual application : Roll the clearshield coating onto the prints using a short-nap roller or a white high-density foam roller. Apply two layers, waiting approximately an hour in-between to complete drying.
Products available :
ClearShield® Classic Gloss – 1L – 360297911
ClearShield® Classic Gloss – 5L – 360298911
ClearShield® Classic Semi Gloss – 1L – 360297912
ClearShield® Classic Semi Gloss – 5L – 360298912
ClearShield® Classic Matte ++ – 1L – 360297924
ClearShield® Classic Matte ++ – 5L – 360298924
SWJ-320 Y-drive belt (Long) – HDK1E-0001
$442.67Mimaki SWJ printers are compatible with this Long Y-drive belt.
SKU: HDK1E-0001
Manufacturer part number: HDK1E-0001
Manufacturer: Mimaki
VJ-1614 Flushing Waste Fluid Receiver – DE-36933
$24.46This Flushing Waste Fluid Receiver is suitable for Mutoh VJ-1614 printers. This is the original Mutoh part (number DE-36933).
SKU: DE-36933
Manufacturer part number: DE-36933
Manufacturer: Mutoh
TX2-1600 Hose Joint – M601138
$43.95Mimaki TX2-1600 printers are compatible with this Hose Joint. The outer diameter of this Hose Joint is 34.1mm, while the inner diameter is 19.05mm. This is original Mimaki part (number M601138).
SKU: M601138
Manufacturer part number: M601138
Manufacturer: Mimaki
Anapurna Mv Solution Bar – D2+7130209-0009
$5,211.65Agfa: Anapurna Mv and Dilli NEO Titan UVT-1606W printers can use this solution bar. This is the original Agfa oart (number D2+7130209-0009).
SKU: D2+7130209-0009
Manufacturer part number: D2+7130209-0009
Manufacturer: Agfa
RE-640 Assy, Cap Top – 6000007135
$236.54Roland RE-640 printers are compatible with this cap top.
SKU: 6000007135
Manufacturer part number: 6000007135
Manufacturer: Roland
Solvent Head Manifold for Epson DX4 printhead
$20.12Manifold that is compatible with Epson DX4 printheads and resists solvents.
SKU: PADEP10MAS
Manufacturers: DIGIPRINT , Epson
Related Products
DIGIMEDIA Monomeric Matte Overlaminate – 1524 mm x 50 m (60″ x 164′)
$251.42
Marabu ClearJet Original Type A2000, Gloss – 12 oz Spray Can
$45.15Protecting your prints, fine art, signs, banners, photographic output, awnings, and other products from UV rays, abrasion, and marring is simple and affordable with Marabu ClearJet®.
SKU: 360363001
Manufacturer part number: 360363001
Manufacturer: Marabu
Marabu Clearshield® Classic – 1L, Gloss
$76.53Marabu Clearshield® Classic is a water-based liquid clear-coat that offers UV-protection, chemical resistance, abrasion resistance and flexibility to any print. ClearShield® Classic is formulated for use with a wide range of non-water-sensitive media such as banner or self-adhesive vinyl and all solvent, eco-solvent, Latex and UV inks
SKU: 360297911
Manufacturer part number:Â 360297911
Manufacturer: Marabu
DIGIMEDIA Monomeric Matte Overlaminate – 1372 mm x 50 m (54″ x 164′)
$227.50
DIGIMEDIA Polymeric Gloss Overlaminate – 1524 mm x 50 m (60″ x 164′)
$380.11
Reviews
There are no reviews yet.