Description
Marabu Clearshield® Classic Lite is a low-viscosity water-based liquid coating for enhanced UV-protection, chemical and abrasion resistance. can be applied with a brush, roller, or automated spray equipment or by hand. If you’re looking for a laminate with a lower viscosity, Classic Lite is an option that provides the same excellent protection as ClearShield Classic.
Benefits:
Lower in viscosity than ClearShield Classic Lite while offering the same great protection and media compatibility. ClearShield Classic Lite can be applied by roller or automated spray equipment.
Specifications:
Product type : Water based liquid coating
Durability: 5 years outdoor with UV Curable inks
Finish : Gloss, Semi-Gloss or Matt
Viscosity : Shell Cup #2 20 – 26 sec.
VOC : 48g/L
PH : 8.5 -9.0
Application : Short-Nap roller or High Density Foam Roller
Ink compatibility : all solvent, eco-solvent, latex and UV inks
Media compatibilty : adhesive vinyl, banners
Coverage of 1L : around 14-15m2 with Roller
Applications :
Banners
Billboards
Canvas Prints
Signage
Wall covering
Vehicle Graphics
Application Method :
Manual application : Roll the clearshield coating onto the prints using a short-nap roller or a white high-density foam roller. Apply two layers, waiting approximately an hour in-between to complete drying.
Products available :
Marabu Clearshield® Classic Lite – 5L, Semi-Gloss – 360298812
Marabu Clearshield® Classic Lite – 1L, Gloss – 360297811
SJ-500 L-Bearing SSR15XW1 (Block Only)
$653.45Roland SJ-500 printers are compatible with this block, SSR15XW1.
SKU: 414SSR15WSSC1
Manufacturer part number: 21895151
Manufacturer: Roland
Straight Through Reduction Tube Fitting ID Tubing 3.2mm to 2.4mm Nylon Black (20 pcs)
$87.67This set of 20 solvent resistant black nylon straight through tube fitting is suitable for all wide format inkjet printers printers.
SKU: DC-2/20
Manufacturer: DIGIPRINT
Timing Belt S2M-638 – DG-46869
$94.19This Timing Belt S2M-638 is an original Mutoh part, suitable for a specific range of Mutoh printers.
SKU: DG-46869
Manufacturer part number: DG-46869
Manufacturer: Mutoh
JV5-320S X Joint Shaft – M205458
$569.92This X Joint Shaft is suitable for Mimaki JV5-320S & JV5-260S printers.
SKU: M205458
Manufacturer part number: M205458
Manufacturer: Mimaki
CJV30-160 Y Drive Belt C 160 – M801102
$465.20This carriage belt is suitable for Mimaki CJV30-160 printers.
SKU: M801102
Manufacturer part number: M801102
Manufacturer: Mimaki
UltraVu II 5330 Coupling .25-.25 Flex – P7816-A
$448.92VUTEk UltraVu II 5330 printers are compatible with this Coupler.25-.25 Flex. This is the original P7816-A VUTEk component. The width of this Coupler.25-.25 Flex is 25.5 mm. It has an inner diameter of 6.33mm and an outer diameter of 25.30mm.
SKU: P7816-A
Manufacturer part number: P7816-A
Manufacturer: EFI
Related Products
DIGIMEDIA Monomeric Gloss Overlaminate – 1524 mm x 50 m (60″ x 164′)
$251.42High-quality, self-adhesive 70 clear monomeric vinyl with UV protection and an acrylic-based, high-tack, permanent adhesive. This competitive calendered vinyl, which comes in gloss and matte finishes, is an excellent lamination for protecting digitally printed images. Easy to clean, this film can also be used as anti-graffiti protection. As low as €1.05 per square meter.
SKU: DLMG60
Manufacturer part number: DLMG60
Manufacturer: DIGIPRINT
DIGIMEDIA Monomeric Overlaminate
$228.14High-quality, self-adhesive 70 clear monomeric vinyl with UV protection and an acrylic-based, high-tack, permanent adhesive. This competitive calendered vinyl, which comes in gloss and matte finishes, is an excellent lamination for protecting digitally printed images. Easy to clean, this film can also be used as anti-graffiti protection. Prices start at €1.20 per square meter.
SKU: DLMG54
Manufacturer part number: DLMG54
Manufacturer: DIGIPRINT
DIGIMEDIA Monomeric Matte Overlaminate – 1372 mm x 50 m (54″ x 164′)
$227.50
Marabu ClearJet Original Type A2000, Gloss – 12 oz Spray Can
$45.15Protecting your prints, fine art, signs, banners, photographic output, awnings, and other products from UV rays, abrasion, and marring is simple and affordable with Marabu ClearJet®.
SKU: 360363001
Manufacturer part number: 360363001
Manufacturer: Marabu
DIGIMEDIA Monomeric Gloss Overlaminate – 1600 mm x 50 m (63″ x 164′)
$277.82High-quality, self-adhesive 70 clear monomeric vinyl with UV protection and an acrylic-based, high-tack, permanent adhesive. This competitive calendered vinyl, which comes in gloss and matte finishes, is an excellent lamination for protecting digitally printed images. Easy to clean, this film can also be used as anti-graffiti protection. As low as €1.05 per square meter
SKU: DLMG63
Manufacturer part number: DLMG63
Distributor: DIGIPRINT
Reviews
There are no reviews yet.