Description
Marabu Clearshield® Classic Lite is a low-viscosity water-based liquid coating for enhanced UV-protection, chemical and abrasion resistance. can be applied with a brush, roller, or automated spray equipment or by hand. If you’re looking for a laminate with a lower viscosity, Classic Lite is an option that provides the same excellent protection as ClearShield Classic.
Benefits:
Lower in viscosity than ClearShield Classic Lite while offering the same great protection and media compatibility. ClearShield Classic Lite can be applied by roller or automated spray equipment.
Specifications:
Product type : Water based liquid coating
Durability: 5 years outdoor with UV Curable inks
Finish : Gloss, Semi-Gloss or Matt
Viscosity : Shell Cup #2 20 – 26 sec.
VOC : 48g/L
PH : 8.5 -9.0
Application : Short-Nap roller or High Density Foam Roller
Ink compatibility : all solvent, eco-solvent, latex and UV inks
Media compatibilty : adhesive vinyl, banners
Coverage of 1L : around 14-15m2 with Roller
Applications :
Banners
Billboards
Canvas Prints
Signage
Wall covering
Vehicle Graphics
Application Method :
Manual application : Roll the clearshield coating onto the prints using a short-nap roller or a white high-density foam roller. Apply two layers, waiting approximately an hour in-between to complete drying.
Products available :
Marabu Clearshield® Classic Lite – 5L, Semi-Gloss – 360298812
Marabu Clearshield® Classic Lite – 1L, Gloss – 360297811
CX-24 Belt, 1526P2M6 – 11929116
$78.18Picture of CX-24 Belt, 1526P2M6 – 11929116Picture of CX-24 Belt, 1526P2M6 – 11929116Picture of CX-24 Belt, 1526P2M6 – 11929116
The Roland CX-24 and GX-24 cutting plotters are compatible with this belt. This is the original Roland part (number 11929116). This belt has a circumference of 151.8cm and is 0.6cm wide.
SKU: 11929116
Manufacturer part number: 11929116
Manufacturer: Roland
FP-740 BELT,BOTTLE BU-1 – 1000003882
$22.51This product has been discontinued by the manufacturer. Please continue reading for additional details.
SKU: 1000003882
Manufacturer part number: 1000003882
Manufacturer: Roland
FP-740 Carton, Media Set – 1000001177
$50.18This product has been discontinued by the manufacturer. Please scroll down for more information below.
SKU: 1000001177
Manufacturer part number: 1000001177
Manufacturer: Roland
Colorpainter 64S Capping Station Belt – U00036259700
$28.94This capping station belt is suitable for Seiko Colorpainter 64S / Colorpainter 100S / IP-4500 / IP-4010 printers.
SKU: SRS03M288-06NGB
Manufacturer part number: U00036259700
Manufacturer: Oki
XJ-740 ADAPTER,CARRIAGE L – 1000003621
$106.15The manufacturer has discontinued this product. Please scroll down for more information below.
SKU: 1000003621
Manufacturer part number: 1000003621
Manufacturer: Roland
Timing Belt Assy – DG-48721
$146.00This Timing Belt Assy is an original Mutoh part, suitable for a specific range of Mutoh printers.
SKU: DG-48721
Manufacturer part number: DG-48721
Manufacturer: Mutoh
Related Products
DIGIMEDIA Monomeric Matte Overlaminate – 1060 mm x 50 m (42″ x 164′)
$164.50
Marabu Clearshield® Wall Armor – 20L, Satin
$1,116.30Marabu Clearshield® Wall Armor is a water-based liquid coating that offers stain, scratch and abrasion resistance as well as fire retardancy to your digital wall covering prints. Eco-solvent, UV-curable, and latex inks are all compatible with Clearshield® Wall Armor.
SKU: 360299853
Manufacturer part number:Â 360299853
Manufacturer: Marabu
DIGIMEDIA Monomeric Gloss Overlaminate – 1600 mm x 50 m (63″ x 164′)
$277.82High-quality, self-adhesive 70 clear monomeric vinyl with UV protection and an acrylic-based, high-tack, permanent adhesive. This competitive calendered vinyl, which comes in gloss and matte finishes, is an excellent lamination for protecting digitally printed images. Easy to clean, this film can also be used as anti-graffiti protection. As low as €1.05 per square meter
SKU: DLMG63
Manufacturer part number: DLMG63
Distributor: DIGIPRINT
DIGIMEDIA Monomeric Gloss Overlaminate – 1372 mm x 50 m (54″ x 164′)
$228.14
DIGIMEDIA Monomeric Matte Overlaminate – 1372 mm x 50 m (54″ x 164′)
$227.50
Marabu ClearShield ® Anti-Graffiti Part B, Gloss – 4 oz
$29.06arabu Clearshield® Anti-Graffiti is a two-part water-based liquid clear-coat that offers UV-protection, chemical resistance, abrasion resistance and unmatched anti-graffiti properties to any print. It is made to protect non-water-sensitive media like vinyl and banners printed with UV, solvent, and Latex inks from graffiti made with spray paint, latex paint, markers, and other materials.
SKU: 360261591
Manufacturer part number: 360261591
Manufacturer: Marabu
Reviews
There are no reviews yet.