Description
Marabu Clearshield® Classic Lite is a low-viscosity water-based liquid coating for enhanced UV-protection, chemical and abrasion resistance. can be applied with a brush, roller, or automated spray equipment or by hand. If you’re looking for a laminate with a lower viscosity, Classic Lite is an option that provides the same excellent protection as ClearShield Classic.
Benefits:
Lower in viscosity than ClearShield Classic Lite while offering the same great protection and media compatibility. ClearShield Classic Lite can be applied by roller or automated spray equipment.
Specifications:
Product type : Water based liquid coating
Durability: 5 years outdoor with UV Curable inks
Finish : Gloss, Semi-Gloss or Matt
Viscosity : Shell Cup #2 20 – 26 sec.
VOC : 48g/L
PH : 8.5 -9.0
Application : Short-Nap roller or High Density Foam Roller
Ink compatibility : all solvent, eco-solvent, latex and UV inks
Media compatibilty : adhesive vinyl, banners
Coverage of 1L : around 14-15m2 with Roller
Applications :
Banners
Billboards
Canvas Prints
Signage
Wall covering
Vehicle Graphics
Application Method :
Manual application : Roll the clearshield coating onto the prints using a short-nap roller or a white high-density foam roller. Apply two layers, waiting approximately an hour in-between to complete drying.
Products available :
Marabu Clearshield® Classic Lite – 5L, Semi-Gloss – 360298812
Marabu Clearshield® Classic Lite – 1L, Gloss – 360297811
ColorPainter M-64s Belt, MW – U00130615700
$560.36Printers made by Seiko ColorPainter M-64s are compatible with this Belt, MW.
SKU: U00130615700
Manufacturer part number: U00130615700
Manufacturer: Oki
Waste Fluid Tray Assy – DG-47746
$106.29This Waste Fluid Tray Assy is an original Mutoh component that works with certain Mutoh printer models.
SKU: DG-47746
Manufacturer part number: DG-47746
Manufacturer: Mutoh
JV33-130 LM Guide – SSR15xW2GE+2020LY
$1,378.20This LM guide is suitable for Mimaki JV33-130 & JV33-130BS printers.
SKU: SSR15XW2GE+2020LY
Manufacturer part number: SSR15xW2GE+2020LY
Manufacturer: Mimaki
TS500-1800 Sub Tank – M012644
$964.88Mimaki TS500-1800 printers are compatible with this Sub Tank. This is the original Mimaki part, M012644, which can be found here.
SKU: M012644
Manufacturer part number: M012644
Manufacturer: Mimaki
SummaCut ASSY, Y-BELT D140 – 399-734
$625.74This ASSY, Y-BELT D140 is suitable for SummaCut cutters. This is the first part of the Summa (numbered 399-734).
SKU: 399-734
Manufacturer part number: 399-734
Manufacturer: Summa
JV5 Y joint 1-2D – M601888
$5.17This Mimaki Y joint 1-2D is suitable for JV5 printers.
SKU: M601888
Manufacturer part number: M601888
Manufacturer: Mimaki
Related Products
DIGIMEDIA Monomeric Gloss Overlaminate – 1372 mm x 50 m (54″ x 164′)
$228.14
DIGIMEDIA Polymeric Gloss Overlaminate – 1372 mm x 50 m (54″ x 164′)
$343.97
DIGIMEDIA Monomeric Matte Overlaminate – 1372 mm x 50 m (54″ x 164′)
$227.50
Marabu ClearShield® Anti-Graffiti Part A, Gloss – 1 Quart
$142.91Marabu Clearshield® Anti-Graffiti is a two-part, water-based liquid clear coat that protects any print from UV rays, resists chemicals and abrasion, and has unparalleled anti-graffiti properties. It is made to protect non-water-sensitive media like vinyl and banners printed with UV, solvent, and Latex inks from graffiti made with spray paint, latex paint, markers, and other materials.
SKU: 360264581
Manufacturer part number: 360264581
Manufacturer: Marabu
DIGIMEDIA Polymeric Gloss Overlaminate – 1524 mm x 50 m (60″ x 164′)
$380.11
DIGIMEDIA Monomeric Matte Overlaminate – 1600 mm x 50 m (63″ x 164′)
$277.82High-quality, self-adhesive 70 clear monomeric vinyl with UV protection and an acrylic-based, high-tack, permanent adhesive. This competitive calendered vinyl, which comes in gloss and matte finishes, is an excellent lamination for protecting digitally printed images. Easy to clean, this film can also be used as anti-graffiti protection.
SKU: DLMM63
Manufacturer part number: DLMM63
Manufacturer: DIGIPRINT
Reviews
There are no reviews yet.