Description
Marabu Clearshield® Classic Lite is a low-viscosity water-based liquid coating for enhanced UV-protection, chemical and abrasion resistance. can be applied with a brush, roller, or automated spray equipment or by hand. If you’re looking for a laminate with a lower viscosity, Classic Lite is an option that provides the same excellent protection as ClearShield Classic.
Benefits:
Lower in viscosity than ClearShield Classic Lite while offering the same great protection and media compatibility. ClearShield Classic Lite can be applied by roller or automated spray equipment.
Specifications:
Product type : Water based liquid coating
Durability: 5 years outdoor with UV Curable inks
Finish : Gloss, Semi-Gloss or Matt
Viscosity : Shell Cup #2 20 – 26 sec.
VOC : 48g/L
PH : 8.5 -9.0
Application : Short-Nap roller or High Density Foam Roller
Ink compatibility : all solvent, eco-solvent, latex and UV inks
Media compatibilty : adhesive vinyl, banners
Coverage of 1L : around 14-15m2 with Roller
Applications :
Banners
Billboards
Canvas Prints
Signage
Wall covering
Vehicle Graphics
Application Method :
Manual application : Roll the clearshield coating onto the prints using a short-nap roller or a white high-density foam roller. Apply two layers, waiting approximately an hour in-between to complete drying.
Products available :
Marabu Clearshield® Classic Lite – 5L, Semi-Gloss – 360298812
Marabu Clearshield® Classic Lite – 1L, Gloss – 360297811
JV150-160 F Seal Rubber 300H – M700734 (20pcs)
$63.19This set of 20 F seal rubbers is suitable for Mimaki printers.
SKU: PCN700734
Manufacturer part number: M700734
Manufacturers: Mimaki , DIGIPRINT
XJ-640 Belt,150S2M2754LW-C – 1000003688
$644.02Roland XJ-640 printers can use this generic belt.
SKU: PBEROXJ6001O
Manufacturer part number: 1000003688
Manufacturers: DIGIPRINT , Roland
26 pin Connector – AKC26H-ND
$12.63SKU: AKC26H-ND
Manufacturer part number: AKC26H-ND
Manufacturer: DIGIPRINT
UJF-3042 Cap Assy – M012112
$182.13Mimaki UJF-3042 printers can use this Cap Assy.
SKU: M012112
Manufacturer part number: M012112
Manufacturer: Mimaki
FP-740 Carton, Gauge TU-750 – 22605113
$13.84This product has been discontinued by the manufacturer. Please scroll down for more information below.
SKU: 22605113
Manufacturer part number: 22605113
Manufacturer: Roland
Mimaki / Roland / Mutoh Solvent Resistant Y Connector (ID: 3mm, OD: 4mm)
$15.08Three tubes with an ID of 3 mm and an OD of 4 mm can be connected with this solvent-resistant Y connector.
SKU: PCNDI8749
Manufacturers: DIGIPRINT , Mutoh , Roland , Mimaki
Related Products
Marabu Clearshield® Wall Armor – 20L, Satin
$1,116.30Marabu Clearshield® Wall Armor is a water-based liquid coating that offers stain, scratch and abrasion resistance as well as fire retardancy to your digital wall covering prints. Eco-solvent, UV-curable, and latex inks are all compatible with Clearshield® Wall Armor.
SKU: 360299853
Manufacturer part number:Â 360299853
Manufacturer: Marabu
DIGIMEDIA Monomeric Gloss Overlaminate – 1524 mm x 50 m (60″ x 164′)
$251.42High-quality, self-adhesive 70 clear monomeric vinyl with UV protection and an acrylic-based, high-tack, permanent adhesive. This competitive calendered vinyl, which comes in gloss and matte finishes, is an excellent lamination for protecting digitally printed images. Easy to clean, this film can also be used as anti-graffiti protection. As low as €1.05 per square meter.
SKU: DLMG60
Manufacturer part number: DLMG60
Manufacturer: DIGIPRINT
Marabu Clearshield® Classic – 5L, Gloss
$306.08Marabu Clearshield® Classic is a water-based liquid clear-coat that offers UV-protection, chemical resistance, abrasion resistance and flexibility to any print. ClearShield® Classic is formulated for use with a wide range of non-water-sensitive media such as banner or self-adhesive vinyl and all solvent, eco-solvent, Latex and UV inks
SKU: 360298911
Manufacturer part number: 360298911
Manufacturer: Marabu
DIGIMEDIA Polymeric Matte Overlaminate – 1372 mm x 50 m (54″ x 164′) – PALLET
$379.38
DIGIMEDIA Monomeric Matte Overlaminate – 1600 mm x 50 m (63″ x 164′)
$277.82High-quality, self-adhesive 70 clear monomeric vinyl with UV protection and an acrylic-based, high-tack, permanent adhesive. This competitive calendered vinyl, which comes in gloss and matte finishes, is an excellent lamination for protecting digitally printed images. Easy to clean, this film can also be used as anti-graffiti protection.
SKU: DLMM63
Manufacturer part number: DLMM63
Manufacturer: DIGIPRINT
Reviews
There are no reviews yet.