Description
Marabu Clearshield® Classic Lite is a low-viscosity water-based liquid coating for enhanced UV-protection, chemical and abrasion resistance. can be applied with a brush, roller, or automated spray equipment or by hand. If you’re looking for a laminate with a lower viscosity, Classic Lite is an option that provides the same excellent protection as ClearShield Classic.
Benefits:
Lower in viscosity than ClearShield Classic Lite while offering the same great protection and media compatibility. ClearShield Classic Lite can be applied by roller or automated spray equipment.
Specifications:
Product type : Water based liquid coating
Durability: 5 years outdoor with UV Curable inks
Finish : Gloss, Semi-Gloss or Matt
Viscosity : Shell Cup #2 20 – 26 sec.
VOC : 48g/L
PH : 8.5 -9.0
Application : Short-Nap roller or High Density Foam Roller
Ink compatibility : all solvent, eco-solvent, latex and UV inks
Media compatibilty : adhesive vinyl, banners
Coverage of 1L : around 14-15m2 with Roller
Applications :
Banners
Billboards
Canvas Prints
Signage
Wall covering
Vehicle Graphics
Application Method :
Manual application : Roll the clearshield coating onto the prints using a short-nap roller or a white high-density foam roller. Apply two layers, waiting approximately an hour in-between to complete drying.
Products available :
Marabu Clearshield® Classic Lite – 5L, Semi-Gloss – 360298812
Marabu Clearshield® Classic Lite – 1L, Gloss – 360297811
Jetrix 2513FRQ Bearing – SG20-2RS
$17.92The Inktec Jetrix 2513FRQ printers can use this generic bearing.
SKU: PMEIN19751
Manufacturer part number: SG20-2RS
Manufacturers: Inktec , DIGIPRINT
Roland ADAPTER,I/C BU-1 – 1000003807
$13.91The manufacturer has discontinued this product. Please continue reading for additional details.
SKU: 1000003807
Manufacturer part number: 1000003807
Manufacturer: Roland
RA-640 Adapter Plug (100V) – 13499209
$26.34Roland RA-640 printers are compatible with this Adapter Plug (100V). This is the original Roland part (number 13499209).
SKU: 13499209
Manufacturer part number: 13499209
Manufacturer: Roland
VS-640 ADAPTER,SHAFT TUC-2 – 1000009860
$157.54The Roland VS-300, VS-420, VS-540, VS-640, VG-540, VG-640, VS-300i, VS-540i, VS-640i, VP-300, VP-540, VP-300i, VP-540i, SP-300v, SP-300i, SP-540i, RS-540, RS-640, RA-640, and RE-640 printers are compatible with this adapt This is the original Roland part (number 1000009860).
SKU: 1000009860
Manufacturer part number: 1000009860
Manufacturer: Roland
Marabu Clearshield® Classic Lite – 5L – Semi-Gloss
$306.08Marabu Clearshield® Classic is a water-based liquid coating with a low viscosity that provides enhanced UV protection as well as chemical and abrasion resistance. can be applied with a brush, roller, or automated spray equipment or by hand. If you’re looking for a laminate with a lower viscosity, Classic Lite is an option that provides the same excellent protection as ClearShield Classic.
SKU: 360298812
Manufacturer part number: 360298812
Manufacturer: Marabu
GS Series Belt Timing HTD-5, 30 MM W X 430 IN – 45075896
$3,412.71This timing belt is suitable for EFI VUTEk GS series printers. The original EFI component is this one (number 45075896). This timing belt has a width of 30 mm and a length of 10,92 m.
SKU: 45075896
Manufacturer part number: 45075896
Manufacturer: EFI
Related Products
Marabu ClearJet Original Type A2000, Gloss – 12 oz Spray Can
$45.15Protecting your prints, fine art, signs, banners, photographic output, awnings, and other products from UV rays, abrasion, and marring is simple and affordable with Marabu ClearJet®.
SKU: 360363001
Manufacturer part number: 360363001
Manufacturer: Marabu
DIGIMEDIA Polymeric Gloss Overlaminate – 1524 mm x 50 m (60″ x 164′)
$380.11
DIGIMEDIA Polymeric Matte Overlaminate – 1372 mm x 50 m (54″ x 164′) – PALLET
$379.38
Marabu ClearShield® Anti-Graffiti Part A, Gloss – 1 Quart
$142.91Marabu Clearshield® Anti-Graffiti is a two-part, water-based liquid clear coat that protects any print from UV rays, resists chemicals and abrasion, and has unparalleled anti-graffiti properties. It is made to protect non-water-sensitive media like vinyl and banners printed with UV, solvent, and Latex inks from graffiti made with spray paint, latex paint, markers, and other materials.
SKU: 360264581
Manufacturer part number: 360264581
Manufacturer: Marabu
DIGIMEDIA Polymeric Matte Overlaminate – 1524 mm x 50 m (60″ x 164′)
$380.11
Marabu ClearShield ® Anti-Graffiti Part B, Gloss – 4 oz
$29.06arabu Clearshield® Anti-Graffiti is a two-part water-based liquid clear-coat that offers UV-protection, chemical resistance, abrasion resistance and unmatched anti-graffiti properties to any print. It is made to protect non-water-sensitive media like vinyl and banners printed with UV, solvent, and Latex inks from graffiti made with spray paint, latex paint, markers, and other materials.
SKU: 360261591
Manufacturer part number: 360261591
Manufacturer: Marabu
Reviews
There are no reviews yet.