Description
Marabu Clearshield® Classic Lite is a low-viscosity water-based liquid coating for enhanced UV-protection, chemical and abrasion resistance. can be applied with a brush, roller, or automated spray equipment or by hand. If you’re looking for a laminate with a lower viscosity, Classic Lite is an option that provides the same excellent protection as ClearShield Classic.
Benefits:
Lower in viscosity than ClearShield Classic Lite while offering the same great protection and media compatibility. ClearShield Classic Lite can be applied by roller or automated spray equipment.
Specifications:
Product type : Water based liquid coating
Durability: 5 years outdoor with UV Curable inks
Finish : Gloss, Semi-Gloss or Matt
Viscosity : Shell Cup #2 20 – 26 sec.
VOC : 48g/L
PH : 8.5 -9.0
Application : Short-Nap roller or High Density Foam Roller
Ink compatibility : all solvent, eco-solvent, latex and UV inks
Media compatibilty : adhesive vinyl, banners
Coverage of 1L : around 14-15m2 with Roller
Applications :
Banners
Billboards
Canvas Prints
Signage
Wall covering
Vehicle Graphics
Application Method :
Manual application : Roll the clearshield coating onto the prints using a short-nap roller or a white high-density foam roller. Apply two layers, waiting approximately an hour in-between to complete drying.
Products available :
Marabu Clearshield® Classic Lite – 5L, Semi-Gloss – 360298812
Marabu Clearshield® Classic Lite – 1L, Gloss – 360297811
JV34-260 Damper Joint Assy – M010793
$25.60This damper joint assy is suitable for Mimaki JV34-260 printers.
SKU: M010793
Manufacturer part number: M010793
Manufacturer: Mimaki
1,5L Ink Tank (WH) – DG-48847
$559.35This 1,5L Ink Tank (WH) is an original Mutoh part, suitable for a specific range of Mutoh printers.
SKU: DG-48847
Manufacturer part number: DG-48847
Manufacturer: Mutoh
Jetrix 2030 Speed Controller with Fitting
$74.01This Speed Controller with Fitting is suitable for Inktec Jetrix 2030 series printers.
SKU: AS1001FG-06
Manufacturer part number: 00-AK00-05
Manufacturer: Inktec
Toucan Steel Belt, 87 Assy – DF-44132
$232.18This generic Steel Belt, 87″ Assy is suitable for Mutoh Toucan 87 printers. The Mutoh part number DF-44132, which was discontinued and is no longer available as an original part, is matched by this high-quality generic steel belt. This Steel Belt, 87″ Assy is 482.5cm long and 2.5cm wide.
SKU: PBEMUTO6002O
Manufacturer part number: DF-44132
Manufacturers: DIGIPRINT , Mutoh
AJ-1000 Bearing 10-19ZZ – 22175870
$12.99Roland AJ-1000 printers can use this generic bearing.
SKU: PMEROAJ9002
Manufacturer part number: 22175870
Manufacturers: Roland , DIGIPRINT
CJV30-60 Y Drive Belt C-60 – M801109
$319.69Mimaki CJV30-60 printers can use this Y drive belt C-60. This is the original Mimaki part (number M801109).
SKU: M801109
Manufacturer part number: M801109
Manufacturer: Mimaki
Related Products
DIGIMEDIA Monomeric Gloss Overlaminate – 1600 mm x 50 m (63″ x 164′)
$277.82High-quality, self-adhesive 70 clear monomeric vinyl with UV protection and an acrylic-based, high-tack, permanent adhesive. This competitive calendered vinyl, which comes in gloss and matte finishes, is an excellent lamination for protecting digitally printed images. Easy to clean, this film can also be used as anti-graffiti protection. As low as €1.05 per square meter
SKU: DLMG63
Manufacturer part number: DLMG63
Distributor: DIGIPRINT
DIGIMEDIA Monomeric Gloss Overlaminate – 1372 mm x 50 m (54″ x 164′)
$228.14
DIGIMEDIA Monomeric Gloss Overlaminate – 1050 mm x 50 m (42″ x 164′)
$164.50High-quality, self-adhesive monomeric 70μ clear vinyl, with UV protection and a permanent, high tack acrylic-based, adhesive. This competitive calendered vinyl, which comes in gloss and matte finishes, is an excellent lamination for protecting digitally printed images. Easy to clean, this film can also be used as anti-graffiti protection. Price per sqm: as low as €1.30 / sqm
SKU: DLMG42
Manufacturer part number: DLMG42
Manufacturer: DIGIPRINT
Marabu Clearshield® Classic – 5L, Gloss
$306.08Marabu Clearshield® Classic is a water-based liquid clear-coat that offers UV-protection, chemical resistance, abrasion resistance and flexibility to any print. ClearShield® Classic is formulated for use with a wide range of non-water-sensitive media such as banner or self-adhesive vinyl and all solvent, eco-solvent, Latex and UV inks
SKU: 360298911
Manufacturer part number: 360298911
Manufacturer: Marabu
Marabu ClearShield Classic – 5L, Semi-Gloss
$306.08Marabu Clearshield® Classic is a water-based liquid clear-coat that offers UV-protection, chemical resistance, abrasion resistance and flexibility to any print. All solvent, eco-solvent, latex, and UV inks can be used with ClearShield® Classic, which is designed to be used with a wide variety of non-water-sensitive media like banners and self-adhesive vinyl.
SKU: 360298912
Manufacturer part number: 360298912
Manufacturer: Marabu
Reviews
There are no reviews yet.