Description
This Straight Hose Tail Coupling 1/8″ is suitable for a specific range of printers using Starfire printheads.
Specifications:
Termination: In-Line Hose Barb
Size of the tube: 1/8″ ID Metric Eq.: 3.2mm ID
JV5 Bearing – MF105ZZ
$13.04Mimaki JV5, CJV30, and JV33 series printers, as well as UJV-110 and UJV-160 printers, are compatible with this generic bearing.
SKU: PMEMF105ZZ
Manufacturer part number: MF105ZZ
Manufacturers: Mimaki , DIGIPRINT
XC-540 Adapter,Tube 2-4-T – 1000001577
$13.33Roland XC-540 printers are compatible with this adapter, tube 2-4-t.
SKU: 1000001577
Manufacturer part number: 1000001577
Manufacturer: Roland
Jetrix Male Luer Integral Lock Ring to 1/4-28 UNF Thread (20 pcs) – 00-AN00-86
$184.15This set of 20 Male Luer Integral Lock Rings to fit the Inktec Jetrix 3015FQ and 2513FRQ printers has a 1/4-28 UNF thread.
SKU: SMTLL-1/20
Manufacturer part number: 00-AN00-86
Manufacturers: Inktec , DIGIPRINT
Marabu Clearshield® Classic Lite – 5L – Semi-Gloss
$306.08Marabu Clearshield® Classic is a water-based liquid coating with a low viscosity that provides enhanced UV protection as well as chemical and abrasion resistance. can be applied with a brush, roller, or automated spray equipment or by hand. If you’re looking for a laminate with a lower viscosity, Classic Lite is an option that provides the same excellent protection as ClearShield Classic.
SKU: 360298812
Manufacturer part number: 360298812
Manufacturer: Marabu
QS Series Fitting .170 Elbow Barb Quick Disconnec – 45088233
$441.91This Fitting .170 Elbow Barb Quick Disconnec is suitable for EFI VUTEk QS series printers. This is the original EFI part (number 45088233).
SKU: 45088233
Manufacturer part number: 45088233
Manufacturer: EFI
QS2000 Belt Timing HTD5 30FT – P5183-30.0
$556.75This generic 9,14m (30 feet ) long timing belt is suitable for EFI VUTEk QS2000 Series printers.
SKU: PBEVU82716O
Manufacturer part number: P5183-30.0
Manufacturers: DIGIPRINT , EFI
Related Products
VJ-1608HS CR Deceleration Belt Assy – DG-42458
$52.86Mutoh VJ-1608HS printers can use this generic CR Deceleration Belt Assy.
SKU: 011011
Manufacturer part number: DG-42458
Manufacturers: DIGIPRINT , Mutoh
QEH15CA L-Bearing (Block only)
$238.90Various Roland and Mimaki printers are compatible with this bearing block, QEH15CA.
SKU: QEH15CA
Manufacturer part number: QEH15CA
Manufacturers: Roland , Mimaki
S Class 75 KIT FLATCABLES S75T – 395-403
$240.67This KIT FLATCABLES S75T is suitable for Summa S Class 75 cutters. This is the original Summa part (number 395-403).
Printer compatibility
Summa S-Class-75-T-Series
REX-62 Connector 30P Cable – ECARC02-0005
$51.47This 30 pins connecting cable is suitable for DGI REX-62, VT and VTII series printers. This is the original DGI part (number ECARC02-0005 replacing number 1356067). It measures 1.83m long and connects from the main board to the connector board. Printer compatibility DGI REX-62 DGI VT-100D DGI VT-130D DGI VT-62 DGI VT-92 DGI VTII-62 DGI […]
SummaSign BELT X-MOTOR 110T,W=0.25 – MB9124
$28.83Summa SummaSign cutters are compatible with this BELT X-MOTOR 110T, W=0.25.
SKU: 007828
Manufacturer part number: MB9124
Manufacturer: Summa
SJ-740 L-Bearing SSR15XW1UUE – 21895153 (Block only)
$306.56For some Roland printers, this generic bearing block, SSR15XW1UUE, is suitable.
SKU: PMERO17713
Manufacturer part number: 21895154
Manufacturers: Roland , DIGIPRINT
Reviews
There are no reviews yet.