Description
This Adapter, Screw Flex is suitable for Roland AJ-1000 printers. The original Roland component is here (number 1000000521).
JV5 Joint Valve Assy – M006954
$25.67Mimaki printers in the JV5, JV33, and CJV30 series can use this joint Valve Assy.
SKU: M006954
Manufacturer part number: M006954
Manufacturer: Mimaki
DrawCut PRO Cutting Software
$590.27
Straight Through Reduction Tube Fitting 4 mm to 2.4 mm ID (20 pcs)
$83.40This set of 20 solvent resistant white nylon straight through reduction fitting is suitable for all wide format inkjet printers printers.
SKU: 2040-1/20
Manufacturer: DIGIPRINT
Ricoh GEN4 Cap Top
$63.75This cap top is suitable for printers using Ricoh GEN4 printers. On UV printers, this cap top delivers the best performance.
SKU: PCARI87853
Manufacturers: DIGIPRINT , Ricoh
Arizona 550 Belt-Drive Carriage – 3W3010108440
$2,191.37This Belt-Drive Carriage is suitable for Océ Arizona 550 GT / XT printers.
SKU: 3W3010108440
Manufacturer part number: 3010108440
Manufacturer: Canon Océ
CX-24 Belt, 1526P2M6 – 11929116
$78.18Picture of CX-24 Belt, 1526P2M6 – 11929116Picture of CX-24 Belt, 1526P2M6 – 11929116Picture of CX-24 Belt, 1526P2M6 – 11929116
The Roland CX-24 and GX-24 cutting plotters are compatible with this belt. This is the original Roland part (number 11929116). This belt has a circumference of 151.8cm and is 0.6cm wide.
SKU: 11929116
Manufacturer part number: 11929116
Manufacturer: Roland
Related Products
VJ-1604 Bearing – KY-14620
$4.57Mutoh Valuejet 1604 printers can use this generic bearing.
SKU: PMEMUVJ002O
Manufacturer part number: KY-14620
Manufacturers: DIGIPRINT , Mutoh
VJ-1604 Steel Belt – DF-43937
$156.19Mutoh Valuejet 1604 printers are compatible with this generic, high-quality Steel Belt. This is the same generic part as the Mutoh part (DF-43937). This belt is 25 mm wide and 4750 mm long. Part number PBEMUVJ6001 is also available for the original Mutoh belt.
SKU: PBEMU13975
Manufacturer part number: DF-43937
Manufacturers: DIGIPRINT , Mutoh
JV3 Y Timing Belt – 150 S2M 380G
$14.42Mimaki JV3, JV33, and JV5 series printers can use this generic speed reduction belt.
SKU: S2M-380-15MM
Manufacturer part number: 150 S2M 380G
Manufacturers: Mimaki , DIGIPRINT
QEH15CA L-Bearing (Block only)
$238.90Various Roland and Mimaki printers are compatible with this bearing block, QEH15CA.
SKU: QEH15CA
Manufacturer part number: QEH15CA
Manufacturers: Roland , Mimaki
CJV300 Timing Belt – 100S2M210
$28.83Printers in the CJV300, CJV150, JV150, and JV300 series can use this timing belt.
SKU: 10379
Manufacturer part number: 100S2M210
Manufacturer: Mimaki
Carriage Drive Timing Belt
$182.62Specific printers can use this carriage drive timing belt.
SKU: 88S3M312
Manufacturer: DIGIPRINT
Reviews
There are no reviews yet.