Description
This Belt Gantry GT is suitable for Océ Arizona 250 GT printers. This is the original Océ part (number 3010103684). This Belt Gantry GT is 385.6cm long and 3.8cm wide.
JV3 Modified Cap (50 pcs) – M007324
$468.45The Mimaki JV3 printer captops are compatible with this metallic grid. This is the original top grid for the Mimaki cap, number M007324. 50 units are contained in a package. This part takes the place of the discontinued M508337.
SKU: M007324
Manufacturer part number: M007324
Manufacturer: Mimaki
Y Tube Fitting with 400 Series Barbs, 1/16″ (1.6 mm) ID Tubing (100 pc)
$289.09This 100-piece set of Y tube fittings made of white, solvent-resistant polypropylene is compatible with all wide format inkjet printers.
SKU: Y410/6005
Manufacturer: DIGIPRINT
LEJ-640 Joint, Pin R – 1000008722
$679.17The manufacturer has discontinued this product. Please scroll down for more information below.
SKU: 1000008722
Manufacturer part number: 1000008722
Manufacturer: Roland
ADAPTER,TUBE 2.3-4 – 1000017459
$3.32This ADAPTER,TUBE 2.3-4 is a genuine Roland component that is compatible with a particular line of Roland printers.
SKU: 1000017459
Manufacturer part number: 1000017459
Manufacturer: Roland
Anapurna Mv Solution Bar – D2+7130209-0009
$5,211.65Agfa: Anapurna Mv and Dilli NEO Titan UVT-1606W printers can use this solution bar. This is the original Agfa oart (number D2+7130209-0009).
SKU: D2+7130209-0009
Manufacturer part number: D2+7130209-0009
Manufacturer: Agfa
BANDO Open White PU Belt S2M 15mm (5m roll)
$555.09A number of Roland printers can be used with this generic belt.
SKU: GALS2M5
Manufacturer: DIGIPRINT
Related Products
JV3 Y Timing Belt – 150 S2M 380G
$14.42Mimaki JV3, JV33, and JV5 series printers can use this generic speed reduction belt.
SKU: S2M-380-15MM
Manufacturer part number: 150 S2M 380G
Manufacturers: Mimaki , DIGIPRINT
QEH15SA L-Bearing (Block only)
$168.63Various Roland and Mimaki printers are compatible with this bearing block, QEH15SA.
SKU: QEH15SA
Manufacturer part number: QEH15SA
Manufacturers: Roland , Mimaki
S Class 75 KIT FLATCABLES S75T – 395-403
$240.67This KIT FLATCABLES S75T is suitable for Summa S Class 75 cutters. This is the original Summa part (number 395-403).
Printer compatibility
Summa S-Class-75-T-Series
JV33 Y Drive Belt – M800982
$254.72This product has been discontinued by the manufacturer. Please continue reading for additional details.
SKU: M800982
Manufacturer part number: M800982
Manufacturer: Mimaki
JV3 Y Timing Belt – 150 S2M 380G
$11.39Mimaki JV3, JV33, and JV5 series printers are compatible with this generic speed reduction belt.
SKU: PBEMIJV305O
Manufacturer part number: 150 S2M 380G
Manufacturer: DIGIPRINT
SummaSign BELT X-MOTOR 110T,W=0.25 – MB9124
$28.83Summa SummaSign cutters are compatible with this BELT X-MOTOR 110T, W=0.25.
SKU: 007828
Manufacturer part number: MB9124
Manufacturer: Summa
Reviews
There are no reviews yet.