Description
Specific printers can use this carriage drive timing belt. The carriage drive motor and the carriage drive shaft are separated by this belt. The width of this closed belt is 8.8 mm, and its length is 312 mm.
Mimaki / Roland / Mutoh Solvent Resistant Y Connector (ID: 3mm, OD: 4mm)
$15.08Three tubes with an ID of 3 mm and an OD of 4 mm can be connected with this solvent-resistant Y connector.
SKU: PCNDI8749
Manufacturers: DIGIPRINT , Mutoh , Roland , Mimaki
Anapurna M Coupling SR19 – D2+7350101-0001
$126.58The AGFA:Anapurna M printers can use this SR19 coupling. It is used in the print head lifting mechanism. This is the original Agfa component (number D2+7350101-0001 has been substituted for D2+2102083). This SR19 coupling has an inner diameter of 5.98mm and an outer diameter of 19.11mm.
SKU: SRB-19-6-5
Manufacturer part number: D2+7350101-0001
Manufacturer: Agfa
VJ-1604 Bearing 12-28 for VJ-16 – DF-49799
$5.98Mutoh Valuejet 1604 printers are compatible with this generic Bearing 12-28 for VJ-16.
SKU: PMEMU15461
Manufacturer part number: DF-49799
Manufacturers: Mutoh , DIGIPRINT
Jetrix Male Luer Integral Lock Ring to 1/4-28 UNF Thread (20 pcs) – 00-AN00-86
$184.15This set of 20 Male Luer Integral Lock Rings to fit the Inktec Jetrix 3015FQ and 2513FRQ printers has a 1/4-28 UNF thread.
SKU: SMTLL-1/20
Manufacturer part number: 00-AN00-86
Manufacturers: Inktec , DIGIPRINT
Neo Titan Hose Elbow Secondary Tanks – 7300104-0008
$20.70The secondary ink tanks of the Dilli Neo Titan 1604D series printers are attached with this Hose Elbow.
SKU: M-5HL-6
Manufacturer part number: 7300104-0008
Manufacturer: Dilli
SummaSign BELT MXL 110 T 9,5 WIDE U/K – MB9950
$28.83Summa SummaSign cutters are compatible with this BELT MXL 110 T 9,5 WIDE U/K. The original Summa part (number MB9950) can be found here. The circumference of this BELT MXL 110 T 9,5 WIDE U/K is 110 millimeters.
SKU: PBESUSU6022
Manufacturer part number: MB9950
Manufacturer: Summa
Related Products
AJ-1000 Assy, Main Board – 1000000559
$3,431.37This Assy, Main Board is suitable for Roland AJ-1000 printers. This is the original Roland part (number 1000000559). Printer compatibility Roland AJ-1000 Roland AJ-1000i Roland AJ-740 Roland AJ-740i Product specifications Type Main Boards
VJ-1604 Steel Belt – DF-43937
$156.19Mutoh Valuejet 1604 printers are compatible with this generic, high-quality Steel Belt. This is the same generic part as the Mutoh part (DF-43937). This belt is 25 mm wide and 4750 mm long. Part number PBEMUVJ6001 is also available for the original Mutoh belt.
SKU: PBEMU13975
Manufacturer part number: DF-43937
Manufacturers: DIGIPRINT , Mutoh
REX-62 Connector 30P Cable – ECARC02-0005
$51.47This 30 pins connecting cable is suitable for DGI REX-62, VT and VTII series printers. This is the original DGI part (number ECARC02-0005 replacing number 1356067). It measures 1.83m long and connects from the main board to the connector board. Printer compatibility DGI REX-62 DGI VT-100D DGI VT-130D DGI VT-62 DGI VT-92 DGI VTII-62 DGI […]
JV5 Bearing – F699ZZ
$4.93Mimaki JV5, JV33, and UJF-3042 printers are compatible with this generic bearing.
SKU: PMEMI18835
Manufacturer part number: F699ZZ
Manufacturers: Mimaki , DIGIPRINT
VP-540 L-Bearing, SSR15XW1GGE (Block only)
$302.13Several Roland printers are compatible with this bearing block, SSR15XW1GGE (see compatibility list below).
SKU: SSR 15 X W SS G
Manufacturer part number: 1000002145
Manufacturer: Roland
AJ-1000 Assy, Pinch Org Board – W700105720
$69.44This Assy, Pinch Org Board is suitable for Roland AJ-1000 printers. This is the original Roland part (number W700105720).
Printer compatibility
Roland AJ-1000
Roland AJ-1000i
Roland AJ-740
Roland AJ-740i
Product specifications
Reviews
There are no reviews yet.