Description
A wide range of Epson I3200/I1600 printhead-based DTF printers can use this generic capping unit. The inlets for the capping fit ink tubes with an inner diameter of 2 mm. To connect to ink tubes with an inner diameter of 3 millimeters, the connector DC-2/20 must be added. When replacing the printhead, we recommend changing the capping units. One capping unit is required for each head. Please refer to the images to determine which capping will fit your printer. The list of related products at the bottom of this page includes additional cappings that are also suitable for DTF printers.
VJ-426UF I/C Holder Assy 3 (Fitting) – DG-45276
$554.13Mutoh Valuejet 426UF printers are compatible with this I/C Holder Assy 3 (Fitting). The original Mutoh component (number DG-45276) is here.
SKU: DG-45276
Manufacturer part number: DG-45276
Manufacturer: Mutoh
Steel Belt Assy – DG-49266
$121.12A specific line of Mutoh printers can use this standard steel belt.
SKU: PBEMU4926
Manufacturer part number: DG-49266
Manufacturers: Mutoh , DIGIPRINT
SignCut Pro 2 Software and Driver for Mac
$159.47
SummaSign BELT MXL 110 T 9,5 WIDE U/K – MB9950
$28.83Summa SummaSign cutters are compatible with this BELT MXL 110 T 9,5 WIDE U/K. The original Summa part (number MB9950) can be found here. The circumference of this BELT MXL 110 T 9,5 WIDE U/K is 110 millimeters.
SKU: PBESUSU6022
Manufacturer part number: MB9950
Manufacturer: Summa
End Cap (Male) – DG-48839
$90.72This End Cap (Male) is an original Mutoh part, suitable for a specific range of Mutoh printers.
SKU: DG-48839
Manufacturer part number: DG-48839
Manufacturer: Mutoh
VS-640 Carton, Stand – 1000006869
$142.11This product has been discontinued by the manufacturer. Please scroll down for more information below.
SKU: 1000006869
Manufacturer part number: 1000006869
Manufacturer: Roland
Related Products
JV33 Y Drive Belt – M800982
$163.41Mimaki JV33 printers are compatible with this generic Y drive belt, which is also known as a carriage belt.
SKU: PBEMIJV3301S
Manufacturer part number: M800982
Manufacturers: Mimaki , DIGIPRINT
S Class 75 KIT FLATCABLES S75T – 395-403
$240.67This KIT FLATCABLES S75T is suitable for Summa S Class 75 cutters. This is the original Summa part (number 395-403).
Printer compatibility
Summa S-Class-75-T-Series
SummaSign BELT Y-MOTOR 150T – MB0380
$20.91Summa SummaSign cutters are compatible with this BELT Y-MOTOR 150T.
SKU: 004612
Manufacturer part number: MB0380
Manufacturer: Summa
VJ-1604 Steel Belt – DF-43937
$156.19Mutoh Valuejet 1604 printers are compatible with this generic, high-quality Steel Belt. This is the same generic part as the Mutoh part (DF-43937). This belt is 25 mm wide and 4750 mm long. Part number PBEMUVJ6001 is also available for the original Mutoh belt.
SKU: PBEMU13975
Manufacturer part number: DF-43937
Manufacturers: DIGIPRINT , Mutoh
JV5 Bearing – F699ZZ
$4.93Mimaki JV5, JV33, and UJF-3042 printers are compatible with this generic bearing.
SKU: PMEMI18835
Manufacturer part number: F699ZZ
Manufacturers: Mimaki , DIGIPRINT
REX-62 Connector 30P Cable – ECARC02-0005
$51.47This 30 pins connecting cable is suitable for DGI REX-62, VT and VTII series printers. This is the original DGI part (number ECARC02-0005 replacing number 1356067). It measures 1.83m long and connects from the main board to the connector board. Printer compatibility DGI REX-62 DGI VT-100D DGI VT-130D DGI VT-62 DGI VT-92 DGI VTII-62 DGI […]
Reviews
There are no reviews yet.