Description
A wide range of Epson I3200/I1600 printhead-based DTF printers can use this generic capping unit. The inlets for the capping fit ink tubes with an inner diameter of 2 mm. To connect to ink tubes with an inner diameter of 3 millimeters, the connector DC-2/20 must be added. When replacing the printhead, we recommend changing the capping units. One capping unit is required for each head. Please refer to the images to determine which capping will fit your printer. The list of related products at the bottom of this page includes additional cappings that are also suitable for DTF printers.
LC BIS Connector 3mm – 4mm – FC-402007
$14.07Mutoh printers with a bulk ink system can use this connector, which has a diameter of 3 to 4 mm. The original Mutoh part (number FC-402007) can be found here.
SKU: FC-402007
Manufacturer part number: FC-402007
Manufacturer: Mutoh
AJ-1000 ADAPTER,HEAD BIAS – 1000000857
$16.84The manufacturer has discontinued this product. Please scroll down for more information below.
SKU: 1000000857
Manufacturer part number: 84439910
Manufacturer: Roland
JV400-LX Cap Base Assy – M015203
$503.48Mimaki JV400-LX printers can use this Cap Base Assembly. This is the original Mimaki part, which replaces M700666 with M015203.
SKU: M015203
Manufacturer part number: M015203
Manufacturer: Mimaki
I-Joint (2 – 3) – DG-42521
$17.58This I-Joint (2 – 3) is an original Mutoh part, suitable for a specific range of Mutoh printers.
SKU: DG-42521
Manufacturer part number: DG-42521
Manufacturer: Mutoh
VS-420 L-BEARING,SSR15XW1GGE/W2GE+1750L – 1000007140
$3,714.37This L-BEARING,SSR15XW1GGE/W2GE+1750L is suitable for Roland VS-420 printers. This is the original Roland part (number 1000007140).
SKU: 1000007140
Manufacturer part number: 1000007140
Manufacturer: Roland
S Class 140 ASSY, Y-BELT S140 – 395-385
$1,086.04The manufacturer has discontinued this product. Please continue reading for additional details.
SKU: 395-385
Manufacturer part number: 395-385
Manufacturer: Summa
Related Products
SummaSign BELT X-MOTOR 110T,W=0.25 – MB9124
$28.83Summa SummaSign cutters are compatible with this BELT X-MOTOR 110T, W=0.25.
SKU: 007828
Manufacturer part number: MB9124
Manufacturer: Summa
Summa S Class Kit S(2) 120 Flat Cable – KIT-2030
$416.04This KIT FLATCABLES S120T is suitable for Summa S Class 12 cutters. This is the original Summa part (replacing part number 395-405).
Printer compatibility
Summa S-Class-120-T-Series
JV3 Y Timing Belt – 150 S2M 380G
$14.42Mimaki JV3, JV33, and JV5 series printers can use this generic speed reduction belt.
SKU: S2M-380-15MM
Manufacturer part number: 150 S2M 380G
Manufacturers: Mimaki , DIGIPRINT
S Class 75 KIT FLATCABLES S75T – 395-403
$240.67This KIT FLATCABLES S75T is suitable for Summa S Class 75 cutters. This is the original Summa part (number 395-403).
Printer compatibility
Summa S-Class-75-T-Series
VJ-1608HS CR Deceleration Belt Assy – DG-42458
$52.86Mutoh VJ-1608HS printers can use this generic CR Deceleration Belt Assy.
SKU: 011011
Manufacturer part number: DG-42458
Manufacturers: DIGIPRINT , Mutoh
QEH15CA L-Bearing (Block only)
$238.90Various Roland and Mimaki printers are compatible with this bearing block, QEH15CA.
SKU: QEH15CA
Manufacturer part number: QEH15CA
Manufacturers: Roland , Mimaki
Reviews
There are no reviews yet.