Description
A wide range of Epson I3200/I1600 printhead-based DTF printers can use this generic capping unit. The inlets for the capping fit ink tubes with an inner diameter of 2 mm. To connect to ink tubes with an inner diameter of 3 millimeters, the connector DC-2/20 must be added. When replacing the printhead, we recommend changing the capping units. One capping unit is required for each head. Please refer to the images to determine which capping will fit your printer. The list of related products at the bottom of this page includes additional cappings that are also suitable for DTF printers.
CONNECTOR,SUPPLY SECTION PMCD – 1000021862
$491.43This original Roland component, the CONNECTOR, SUPPLY SECTION PMCD, is compatible with a specific range of Roland printers.
SKU: 1000021862
Manufacturer part number: 1000021862
Manufacturer: Roland
FP-740 Carton, Vk-Spacer – 1000001174
$25.11This product has been discontinued by the manufacturer. Please scroll down for more information below.
SKU: 1000001174
Manufacturer part number: 1000001174
Manufacturer: Roland
SP-300 Assy, Linear ENC Board Service 3-Roland – 6700909040
$297.81Manufacturer part number: 6700909040
Manufacturer: Roland
FP-740 Adapter, Tube Joint I/S – 1000002765
$28.83The Roland FP-740 printers can use this Tube Joint I/S Adapter. The original Roland part in this case is number 1000002765.
SKU: 1000002765
Manufacturer part number: 1000002765
Manufacturer: Roland
SP-300 ADAPTER,MEDIA CLAMP – 21905185
$10.89The manufacturer has discontinued this product. Please continue reading for additional details.
SKU: 21905185
Manufacturer part number: 21905185
Manufacturer: Roland
BELT,150S2M2000LW-C – 1000004586
$911.10This product has been discontinued by the manufacturer. Please scroll down for more information below.
SKU: 1000004586
Manufacturer part number: 1000004586
Manufacturer: Roland
Related Products
REX-62 Connector 30P Cable – ECARC02-0005
$51.47This 30 pins connecting cable is suitable for DGI REX-62, VT and VTII series printers. This is the original DGI part (number ECARC02-0005 replacing number 1356067). It measures 1.83m long and connects from the main board to the connector board. Printer compatibility DGI REX-62 DGI VT-100D DGI VT-130D DGI VT-62 DGI VT-92 DGI VTII-62 DGI […]
JV5 Bearing – F699ZZ
$4.93Mimaki JV5, JV33, and UJF-3042 printers are compatible with this generic bearing.
SKU: PMEMI18835
Manufacturer part number: F699ZZ
Manufacturers: Mimaki , DIGIPRINT
CG1107 Assy, Main Board – 6000003126
$1,845.96This Assy, Main Board is suitable for Roland printers. This is the original Roland part (number 6000003126). Printer compatibility Roland GR-540 Roland GR-640 Roland GR-420 Product specifications Type Main Boards
QEH15CA L-Bearing (Block only)
$238.90Various Roland and Mimaki printers are compatible with this bearing block, QEH15CA.
SKU: QEH15CA
Manufacturer part number: QEH15CA
Manufacturers: Roland , Mimaki
JV3 Y Timing Belt – 150 S2M 380G
$11.39Mimaki JV3, JV33, and JV5 series printers are compatible with this generic speed reduction belt.
SKU: PBEMIJV305O
Manufacturer part number: 150 S2M 380G
Manufacturer: DIGIPRINT
Carriage Drive Timing Belt
$182.62Specific printers can use this carriage drive timing belt.
SKU: 88S3M312
Manufacturer: DIGIPRINT
Reviews
There are no reviews yet.