Description
A wide range of Epson I3200/I1600 printhead-based DTF printers can use this generic capping unit. The inlets for the capping fit ink tubes with an inner diameter of 2 mm. To connect to ink tubes with an inner diameter of 3 millimeters, the connector DC-2/20 must be added. When replacing the printhead, we recommend changing the capping units. One capping unit is required for each head. Please refer to the images to determine which capping will fit your printer. The list of related products at the bottom of this page includes additional cappings that are also suitable for DTF printers.
Roland ADAPTER,KQ2F06-G02N – 1000014132
$52.68The manufacturer has discontinued this product. Please continue reading for additional details.
SKU: 1000014132
Manufacturer part number: 1000014132
Manufacturer: Roland
SJ-1000 Belt,150S2M3653LW-C – 21925148
$974.40Roland SJ-1000 printers are compatible with this Belt,150S2M3653LW-C.
SKU: PBEROSJ6021
Manufacturer part number: 21925148
Manufacturer: Roland
JV4-160 S3M Carriage Belt – M800572
$580.56This carriage belt is suitable for Mimaki JV4 160 printers. This is the original Mimaki part (number M800572). This carriage belt is 527.5cm long and 1.5cm wide.
SKU: M800572
Manufacturer part number: M800572
Manufacturer: Mimaki
UJF-7151 Plus Cap Rubber – M700970
$30.13Mimaki printers are compatible with this UJF-7151 Plus Cap Rubber – M700970.
SKU: M700970
Manufacturer part number: M700970
Manufacturer: Mimaki
Toucan Steel Belt, 64 Assy – DF-44131
$221.67This generic Steel Belt, 64″ Assy is suitable for Mutoh Toucan 64 and Toucan Hybrid printers. This is a high quality generic part that corresponds to Mutoh part number DF-44131. Mutoh does not manufacture the original belt anymore as it was discontinued. This belt measures 472.5cm long and 2.5cm wide.
SKU: PBEMUTO6001O
Manufacturer part number: DF-44131
Manufacturers: DIGIPRINT , Mutoh
AJ-1000 CONNECTOR – 13439261
$3.52The manufacturer has discontinued this product. Please scroll down for more information below.
SKU: 13439261
Manufacturer part number: 13439261
Manufacturer: Roland
Related Products
CJV300 Timing Belt – 100S2M210
$28.83Printers in the CJV300, CJV150, JV150, and JV300 series can use this timing belt.
SKU: 10379
Manufacturer part number: 100S2M210
Manufacturer: Mimaki
VJ-1604 Steel Belt – DF-43937
$156.19Mutoh Valuejet 1604 printers are compatible with this generic, high-quality Steel Belt. This is the same generic part as the Mutoh part (DF-43937). This belt is 25 mm wide and 4750 mm long. Part number PBEMUVJ6001 is also available for the original Mutoh belt.
SKU: PBEMU13975
Manufacturer part number: DF-43937
Manufacturers: DIGIPRINT , Mutoh
VP-540 L-Bearing, SSR15XW1GGE (Block only)
$302.13Several Roland printers are compatible with this bearing block, SSR15XW1GGE (see compatibility list below).
SKU: SSR 15 X W SS G
Manufacturer part number: 1000002145
Manufacturer: Roland
JV33 Y Drive Belt – M800982
$163.41Mimaki JV33 printers are compatible with this generic Y drive belt, which is also known as a carriage belt.
SKU: PBEMIJV3301S
Manufacturer part number: M800982
Manufacturers: Mimaki , DIGIPRINT
JV3 Y Timing Belt – 150 S2M 380G
$14.42Mimaki JV3, JV33, and JV5 series printers can use this generic speed reduction belt.
SKU: S2M-380-15MM
Manufacturer part number: 150 S2M 380G
Manufacturers: Mimaki , DIGIPRINT
VJ-1604 Bearing – KY-14620
$4.57Mutoh Valuejet 1604 printers can use this generic bearing.
SKU: PMEMUVJ002O
Manufacturer part number: KY-14620
Manufacturers: DIGIPRINT , Mutoh
Reviews
There are no reviews yet.