Description
A wide range of Epson I3200/I1600 printhead-based DTF printers can use this generic capping unit. The inlets for the capping fit ink tubes with an inner diameter of 2 mm. To connect to ink tubes with an inner diameter of 3 millimeters, the connector DC-2/20 must be added. When replacing the printhead, we recommend changing the capping units. One capping unit is required for each head. Please refer to the images to determine which capping will fit your printer. The list of related products at the bottom of this page includes additional cappings that are also suitable for DTF printers.
Colorpainter H-74s Sus Belt (HV74) – U00113942200
$355.33This Sus Belt (HV74) is suitable for Seiko ColorPainter H-74s & ColorPainter H2-74s printers.
SKU: U00113942200
Manufacturer part number: U00113942200
Manufacturer: Oki
Ricoh GEN4 Cap Top
$63.75This cap top is suitable for printers using Ricoh GEN4 printers. On UV printers, this cap top delivers the best performance.
SKU: PCARI87853
Manufacturers: DIGIPRINT , Ricoh
VS-640i Carton, Cover – 1000011025
$385.12This product has been discontinued by the manufacturer. Please scroll down for more information below.
SKU: 1000011025
Manufacturer part number: 1000011025
Manufacturer: Roland
VJ-2638 Steel Belt_Assy – DG-43699
$307.58Mutoh Valuejet 2638 printers are compatible with this Steel Belt Assembly.
SKU: DG-43699
Manufacturer part number: DG-43699
Manufacturer: Mutoh
Anapurna M Solution Bar – D2+7130209-0007
$4,096.38This solution bar is suitable for Agfa :Anapurna M printers. The original part from Agfa (number D2+7130209-0007) is here.
SKU: D2+7130209-0007
Manufacturer part number: D2+7130209-0007
Manufacturer: Agfa
PULLEY BEARING – 12569118
$9.27Roland AJ-1000 printers are compatible with this PULLEY BEARING.
SKU: 12569118
Manufacturer part number: 12569118
Manufacturer: Roland
Related Products
JV3 Y Timing Belt – 150 S2M 380G
$14.42Mimaki JV3, JV33, and JV5 series printers can use this generic speed reduction belt.
SKU: S2M-380-15MM
Manufacturer part number: 150 S2M 380G
Manufacturers: Mimaki , DIGIPRINT
VP-540 L-Bearing, SSR15XW1GGE (Block only)
$302.13Several Roland printers are compatible with this bearing block, SSR15XW1GGE (see compatibility list below).
SKU: SSR 15 X W SS G
Manufacturer part number: 1000002145
Manufacturer: Roland
VJ-1604 Steel Belt – DF-43937
$156.19Mutoh Valuejet 1604 printers are compatible with this generic, high-quality Steel Belt. This is the same generic part as the Mutoh part (DF-43937). This belt is 25 mm wide and 4750 mm long. Part number PBEMUVJ6001 is also available for the original Mutoh belt.
SKU: PBEMU13975
Manufacturer part number: DF-43937
Manufacturers: DIGIPRINT , Mutoh
REX-62 Connector 30P Cable – ECARC02-0005
$51.47This 30 pins connecting cable is suitable for DGI REX-62, VT and VTII series printers. This is the original DGI part (number ECARC02-0005 replacing number 1356067). It measures 1.83m long and connects from the main board to the connector board. Printer compatibility DGI REX-62 DGI VT-100D DGI VT-130D DGI VT-62 DGI VT-92 DGI VTII-62 DGI […]
SummaSign BELT Y-MOTOR 150T – MB0380
$20.91Summa SummaSign cutters are compatible with this BELT Y-MOTOR 150T.
SKU: 004612
Manufacturer part number: MB0380
Manufacturer: Summa
VJ-1604 Bearing – KY-14620
$4.57Mutoh Valuejet 1604 printers can use this generic bearing.
SKU: PMEMUVJ002O
Manufacturer part number: KY-14620
Manufacturers: DIGIPRINT , Mutoh
Reviews
There are no reviews yet.