Description
A wide range of Epson I3200/I1600 printhead-based DTF printers can use this generic capping unit. The inlets for the capping fit ink tubes with an inner diameter of 2 mm. To connect to ink tubes with an inner diameter of 3 millimeters, the connector DC-2/20 must be added. When replacing the printhead, we recommend changing the capping units. One capping unit is required for each head. Please refer to the images to determine which capping will fit your printer. The list of related products at the bottom of this page includes additional cappings that are also suitable for DTF printers.
Roland BELT,100S2M763LW-C – 1000012575
$263.18This BELT,100S2M763LW-C is suitable for Roland printers. This is the original Roland part (number 1000012575).
SKU: 1000012575
Manufacturer part number: 1000012575
Manufacturer: Roland
SJ-3250 MXL Belt B-220 6.4
$26.38This belt MXL B-220 6.4 is suitable for DGI Spacejet printers.
SKU: 007977
Manufacturer: DGI
CONNECTOR,SUPPLAY SECTION LM4131 – 1000021807
$39.69This CONNECTOR,SUPPLAY SECTION LM4131 is an original Roland part, suitable for a specific range of Roland printers.
SKU: 1000021807
Manufacturer part number: 1000021807
Manufacturer: Roland
FP-740 Carton, TUC-6070 – 22605275
$806.13The manufacturer has discontinued this product. Please scroll down for more information below.
SKU: 22605275
Manufacturer part number: 22605275
Manufacturer: Roland
BELT,FHT-2*T1909*W14 – 1000024958
$1,506.24The manufacturer has discontinued this product. Please scroll down for more information below.
SKU: 1000024958
Manufacturer part number: 1000024958
Manufacturer: Roland
Arizona 250GT Steel Belt Carriage Drive – 3010103685
$499.84Océ Arizona printers can use this standard Steel Belt. This generic belt, which matches Océ part number 3010103685, is of high quality. The length and width of this Steel Belt Carriage Drive are 38 millimeters.
Related Products
QEH15SA L-Bearing (Block only)
$168.63Various Roland and Mimaki printers are compatible with this bearing block, QEH15SA.
SKU: QEH15SA
Manufacturer part number: QEH15SA
Manufacturers: Roland , Mimaki
SJ-740 L-Bearing SSR15XW1UUE – 21895153 (Block only)
$306.56For some Roland printers, this generic bearing block, SSR15XW1UUE, is suitable.
SKU: PMERO17713
Manufacturer part number: 21895154
Manufacturers: Roland , DIGIPRINT
AJ-1000 Assy, Main Board – 1000000559
$3,431.37This Assy, Main Board is suitable for Roland AJ-1000 printers. This is the original Roland part (number 1000000559). Printer compatibility Roland AJ-1000 Roland AJ-1000i Roland AJ-740 Roland AJ-740i Product specifications Type Main Boards
XJ-640 Belt,150S2M2754LW-C – 1000003688
$644.02Roland XJ-640 printers can use this generic belt.
SKU: PBEROXJ6001O
Manufacturer part number: 1000003688
Manufacturers: DIGIPRINT , Roland
VJ-1608HS CR Deceleration Belt Assy – DG-42458
$52.86Mutoh VJ-1608HS printers can use this generic CR Deceleration Belt Assy.
SKU: 011011
Manufacturer part number: DG-42458
Manufacturers: DIGIPRINT , Mutoh
REX-62 Connector 30P Cable – ECARC02-0005
$51.47This 30 pins connecting cable is suitable for DGI REX-62, VT and VTII series printers. This is the original DGI part (number ECARC02-0005 replacing number 1356067). It measures 1.83m long and connects from the main board to the connector board. Printer compatibility DGI REX-62 DGI VT-100D DGI VT-130D DGI VT-62 DGI VT-92 DGI VTII-62 DGI […]
Reviews
There are no reviews yet.