Description
A wide range of Epson I3200/I1600 printhead-based DTF printers can use this generic capping unit. The inlets for the capping fit ink tubes with an inner diameter of 2 mm. To connect to ink tubes with an inner diameter of 3 millimeters, the connector DC-2/20 must be added. When replacing the printhead, we recommend changing the capping units. One capping unit is required for each head. Please refer to the images to determine which capping will fit your printer. The list of related products at the bottom of this page includes additional cappings that are also suitable for DTF printers.
XC-540 Belt,150S2M2500LW-C – 1000001902
$45.66This Belt,150S2M2500LW-C is suitable for Roland XC-540 printers. The original Roland component is here (number 1000001902). This belt is 15 mm wide and has a length of 5000 mm.
SKU: PBEROXC60012
Manufacturer part number: 1000001902
Manufacturer: Roland
Jeti Jason Toothed Timing Belt – 615-424800
$121.79This original Jason toothed timing belt is suitable for Agfa Gandinnovations Jeti 5000 and 5024 Solvent printers. The belt has a circumference of 424 millimeters and a width of 20 millimeters and can withstand temperatures of -20 to 100 degrees Celsius. This is the original Agfa / Gandinnovations part (number 615-424800).
SKU: HTD 424-8M
Manufacturer part number: 615-424800
Manufacturer: Agfa
XC-540 Adapter, Carriage L – 1000001478
$52.53The manufacturer has discontinued this product. Please scroll down for more information below.
SKU: 1000001478
Manufacturer part number: 1000001478
Manufacturer: Roland
JV3 ID Point Of Contact PCB CN032 – E105363
$29.88This ID Point Of Contact PCB CN032 is suitable for Mimaki JV3 / JV33 / JV5 and CJV30 series printers.
CONNECTOR,SUPPLY SECTION NS1D – 1000021861
$1,984.95This original Roland component, the CONNECTOR, SUPPLY SECTION NS1D, is suitable for a specific line of Roland printers.
SKU: 1000021861
Manufacturer part number: 1000021861
Manufacturer: Roland
Viper TX Bearing – DF-43449
$6.29Mutoh Viper TX printers can use this generic Bearing.
SKU: PMEMUVI6001
Manufacturer part number: DF-43449
Manufacturers: Mutoh , DIGIPRINT
Related Products
XJ-640 Belt,150S2M2754LW-C – 1000003688
$644.02Roland XJ-640 printers can use this generic belt.
SKU: PBEROXJ6001O
Manufacturer part number: 1000003688
Manufacturers: DIGIPRINT , Roland
JV3 Y Timing Belt – 150 S2M 380G
$14.42Mimaki JV3, JV33, and JV5 series printers can use this generic speed reduction belt.
SKU: S2M-380-15MM
Manufacturer part number: 150 S2M 380G
Manufacturers: Mimaki , DIGIPRINT
JV33 Y Drive Belt – M800982
$163.41Mimaki JV33 printers are compatible with this generic Y drive belt, which is also known as a carriage belt.
SKU: PBEMIJV3301S
Manufacturer part number: M800982
Manufacturers: Mimaki , DIGIPRINT
QEH15SA L-Bearing (Block only)
$168.63Various Roland and Mimaki printers are compatible with this bearing block, QEH15SA.
SKU: QEH15SA
Manufacturer part number: QEH15SA
Manufacturers: Roland , Mimaki
VJ-1604 CR Speed Reduction Belt – DF-43940
$56.70Mutoh Valuejet 1604 printers are compatible with this CR speed reduction belt. The original Mutoh component (DF-43940) can be found here. The circumference of this 10-millimeter-wide CR speed reduction belt is 240 millimeters.
SKU: PBEMUVJ6002
Manufacturer part number: DF-43940
Manufacturer: Mutoh
VJ-1604 Steel Belt – DF-43937
$206.65Mutoh Valuejet 1604 printers are compatible with this steel belt.
SKU: DF-43937
Manufacturer part number: DF-43937
Manufacturer: Mutoh
Reviews
There are no reviews yet.