Description
A wide range of Epson I3200/I1600 printhead-based DTF printers can use this generic capping unit. The inlets for the capping fit ink tubes with an inner diameter of 2 mm. To connect to ink tubes with an inner diameter of 3 millimeters, the connector DC-2/20 must be added. When replacing the printhead, we recommend changing the capping units. One capping unit is required for each head. Please refer to the images to determine which capping will fit your printer. The list of related products at the bottom of this page includes additional cappings that are also suitable for DTF printers.
JV3-160SP Cap Slider 4H2 Assy – M007814
$266.18Mimaki JV3-160SP printers can use this capping station with four print heads.
SKU: PCAMIJV3002O
Manufacturer part number: M007814
Manufacturers: DIGIPRINT , Mimaki
XC-540 Assy, Cap-Top 2 – 1000004546 / 1000002794
$114.80For Roland Soljet and Versacamm printers, this original Roland foam cap top is suitable.
SKU: 1000004546
Manufacturer part number: 1000004546
Manufacturer: Roland
Cap Assy (VJ-1638UH) – DG-47545
$465.83This original Mutoh part, the Cap Assy (VJ-1638UH), is suitable for a specific line of Mutoh printers.
SKU: DG-47545
Manufacturer part number: DG-47545
Manufacturer: Mutoh
Y Fitting Assy (3-5) – DH-40580
$125.51This Y Fitting Assy (3-5) is an original Mutoh part, suitable for a specific range of Mutoh printers.
SKU: DH-40580
Manufacturer part number: DH-40580
Manufacturer: Mutoh
JFX Series Sub Tank Assy – M008554
$167.80This product has been discontinued by the manufacturer. Please scroll down for more information below.
SKU: M008554
Manufacturer part number: M008554
Manufacturer: Mimaki
Osprey 102 Steel Belt (26) Assy – DF-47848
$262.41Mutoh Osprey 102 printers can use this generic Steel Belt (26) Assy. A high-quality generic part that is comparable to the Mutoh part (number DF-47848) The length and width of this Steel Belt (26) Assy are 2.5 centimeters. Due to its discontinuation, this belt is no longer available from Mutoh.
SKU: PMEMUOS6016O
Manufacturer part number: DF-47848
Manufacturer: Mutoh
Related Products
S Class 75 KIT FLATCABLES S75T – 395-403
$240.67This KIT FLATCABLES S75T is suitable for Summa S Class 75 cutters. This is the original Summa part (number 395-403).
Printer compatibility
Summa S-Class-75-T-Series
VJ-1604 CR Speed Reduction Belt – DF-43940
$56.70Mutoh Valuejet 1604 printers are compatible with this CR speed reduction belt. The original Mutoh component (DF-43940) can be found here. The circumference of this 10-millimeter-wide CR speed reduction belt is 240 millimeters.
SKU: PBEMUVJ6002
Manufacturer part number: DF-43940
Manufacturer: Mutoh
JV33 Y Drive Belt – M800982
$163.41Mimaki JV33 printers are compatible with this generic Y drive belt, which is also known as a carriage belt.
SKU: PBEMIJV3301S
Manufacturer part number: M800982
Manufacturers: Mimaki , DIGIPRINT
VJ-1604 Bearing – KY-14620
$4.57Mutoh Valuejet 1604 printers can use this generic bearing.
SKU: PMEMUVJ002O
Manufacturer part number: KY-14620
Manufacturers: DIGIPRINT , Mutoh
Summa S Class Kit S(2) 120 Flat Cable – KIT-2030
$416.04This KIT FLATCABLES S120T is suitable for Summa S Class 12 cutters. This is the original Summa part (replacing part number 395-405).
Printer compatibility
Summa S-Class-120-T-Series
REX-62 Connector 30P Cable – ECARC02-0005
$51.47This 30 pins connecting cable is suitable for DGI REX-62, VT and VTII series printers. This is the original DGI part (number ECARC02-0005 replacing number 1356067). It measures 1.83m long and connects from the main board to the connector board. Printer compatibility DGI REX-62 DGI VT-100D DGI VT-130D DGI VT-62 DGI VT-92 DGI VTII-62 DGI […]
Reviews
There are no reviews yet.