Description
A wide range of Epson I3200/I1600 printhead-based DTF printers can use this generic capping unit. The inlets for the capping fit ink tubes with an inner diameter of 2 mm. To connect to ink tubes with an inner diameter of 3 millimeters, the connector DC-2/20 must be added. When replacing the printhead, we recommend changing the capping units. One capping unit is required for each head. Please refer to the images to determine which capping will fit your printer. The list of related products at the bottom of this page includes additional cappings that are also suitable for DTF printers.
Drafstation Grid Roller Bearing Assy – DF-49049
$111.75This Grid roller bearing assy is suitable for Mutoh Drafstation printers.
SKU: DF-49049
Manufacturer part number: DF-49049
Manufacturer: Mutoh
XC-540 Carton, Accessory – 1000001639
$102.32The manufacturer has discontinued this product. Please scroll down for more information below.
SKU: 1000001639
Manufacturer part number: 1000001639
Manufacturer: Roland
Anapurna M2050 Conveyor Belt Wire 3.5m – D2+7910001-0077
$1,250.70Agfa printers are compatible with this Anapurna M2050 Conveyor Belt Wire 3.5m – D2+7910001-0077.
SKU: D2+7910001-0077
Manufacturer part number: D2+7910001-0077
Manufacturer: Agfa
LC BIS Cartridge Bungs 3mm (16 pcs) – KY-08970
$59.76This set of 16 cartridge bungs 3mm is suitable for Mutoh printers with bulk ink system. The original Mutoh component (number KY-08970) is here. The cartridges ME-089019, ME-089017, and ME-089016 are compatible with these bungs.
SKU: KY-08970
Manufacturer part number: KY-08970
Manufacturer: Mutoh
JV3-160SP Cap Slider 4H2 Assy – M007814
$266.18Mimaki JV3-160SP printers can use this capping station with four print heads.
SKU: PCAMIJV3002O
Manufacturer part number: M007814
Manufacturers: DIGIPRINT , Mimaki
GS Series Fitting Luer Male .170 Barb (100 pcs) – P4812-A
$632.40VUTEk QS- and GS-Series printers are compatible with this set of 100 Fitting Luer Male.170.
SKU: MTLL445/1
Manufacturer part number: P4812-A
Manufacturer: EFI
Related Products
QEH15CA L-Bearing (Block only)
$238.90Various Roland and Mimaki printers are compatible with this bearing block, QEH15CA.
SKU: QEH15CA
Manufacturer part number: QEH15CA
Manufacturers: Roland , Mimaki
SummaSign BELT Y-MOTOR 150T – MB0380
$20.91Summa SummaSign cutters are compatible with this BELT Y-MOTOR 150T.
SKU: 004612
Manufacturer part number: MB0380
Manufacturer: Summa
CJV300 Timing Belt – 100S2M210
$28.83Printers in the CJV300, CJV150, JV150, and JV300 series can use this timing belt.
SKU: 10379
Manufacturer part number: 100S2M210
Manufacturer: Mimaki
QEH15SA L-Bearing (Block only)
$168.63Various Roland and Mimaki printers are compatible with this bearing block, QEH15SA.
SKU: QEH15SA
Manufacturer part number: QEH15SA
Manufacturers: Roland , Mimaki
SJ-740 L-Bearing SSR15XW1UUE – 21895153 (Block only)
$306.56For some Roland printers, this generic bearing block, SSR15XW1UUE, is suitable.
SKU: PMERO17713
Manufacturer part number: 21895154
Manufacturers: Roland , DIGIPRINT
S Class 75 KIT FLATCABLES S75T – 395-403
$240.67This KIT FLATCABLES S75T is suitable for Summa S Class 75 cutters. This is the original Summa part (number 395-403).
Printer compatibility
Summa S-Class-75-T-Series
Reviews
There are no reviews yet.