Description
A wide range of Epson I3200/I1600 printhead-based DTF printers can use this generic capping unit. The inlets for the capping fit ink tubes with an inner diameter of 2 mm. To connect to ink tubes with an inner diameter of 3 millimeters, the connector DC-2/20 must be added. When replacing the printhead, we recommend changing the capping units. One capping unit is required for each head. Please refer to the images to determine which capping will fit your printer. The list of related products at the bottom of this page includes additional cappings that are also suitable for DTF printers.
IP-4500 Waste Ink Bottle – IP-841
$260.85This waste ink bottle is suitable for Seiko IP-4500 printers. This is the original Seiko part (number IP-841).
SKU: IP-841
Manufacturer part number: IP-841
Manufacturer: Oki
Epson L1800 capping unit (2pcs)
$116.64This generic capping unit set is suitable for a wide range of Epson L1800 printhead based DTF printers.
SKU: PCAEP3900
Manufacturer part number: F173090
Manufacturer: Epson
Osprey Steel Belt (33) Assy – DF-49599
$455.50This generic Steel Belt (33) Assy is suitable for Mutoh Osprey printers. The Mutoh part number for this high-quality belt is DF-49599. The original Mutoh part has been discontinued. The length and width of this Steel Belt (33) Assy are 2.5 centimeters.
SKU: PMEMUOS6031O
Manufacturer part number: DF-49599
Manufacturers: DIGIPRINT , Mutoh
FJ-500 R-Bearing JIS F688ZZ (5FL) – 22175815
$15.10Roland FJ printers can use this standard R-Bearing.
SKU: PMEROFJ601
Manufacturer part number: 22175815
Manufacturers: Roland , DIGIPRINT
JV5 Bearing – MF105ZZ
$13.04This Bearing is compatible with Mimaki printers of the JV5, CJV30, and JV33 series, as well as UJV-110 and UJV-160 printers.
SKU: MF105ZZ
Manufacturer part number: MF105ZZ
Manufacturer: Mimaki
Jeti 3312 UNF Thread to Hose Barb connector 3mm ID Tubing (20 pcs)
$173.73The Jeti 3312 ink tank uses this set of 20 UNF Thread to Hose Barb connectors, which are compatible with 3mm ID tubing.
SKU: ABR013-6005-1/20
Manufacturers: Agfa , DIGIPRINT
Related Products
REX-62 Connector 30P Cable – ECARC02-0005
$51.47This 30 pins connecting cable is suitable for DGI REX-62, VT and VTII series printers. This is the original DGI part (number ECARC02-0005 replacing number 1356067). It measures 1.83m long and connects from the main board to the connector board. Printer compatibility DGI REX-62 DGI VT-100D DGI VT-130D DGI VT-62 DGI VT-92 DGI VTII-62 DGI […]
VJ-1608HS CR Deceleration Belt Assy – DG-42458
$52.86Mutoh VJ-1608HS printers can use this generic CR Deceleration Belt Assy.
SKU: 011011
Manufacturer part number: DG-42458
Manufacturers: DIGIPRINT , Mutoh
JV5 Bearing – F699ZZ
$4.93Mimaki JV5, JV33, and UJF-3042 printers are compatible with this generic bearing.
SKU: PMEMI18835
Manufacturer part number: F699ZZ
Manufacturers: Mimaki , DIGIPRINT
VJ-1604 Steel Belt – DF-43937
$156.19Mutoh Valuejet 1604 printers are compatible with this generic, high-quality Steel Belt. This is the same generic part as the Mutoh part (DF-43937). This belt is 25 mm wide and 4750 mm long. Part number PBEMUVJ6001 is also available for the original Mutoh belt.
SKU: PBEMU13975
Manufacturer part number: DF-43937
Manufacturers: DIGIPRINT , Mutoh
VJ-1604 CR Speed Reduction Belt – DF-43940
$56.70Mutoh Valuejet 1604 printers are compatible with this CR speed reduction belt. The original Mutoh component (DF-43940) can be found here. The circumference of this 10-millimeter-wide CR speed reduction belt is 240 millimeters.
SKU: PBEMUVJ6002
Manufacturer part number: DF-43940
Manufacturer: Mutoh
XJ-640 Belt,150S2M2754LW-C – 1000003688
$644.02Roland XJ-640 printers can use this generic belt.
SKU: PBEROXJ6001O
Manufacturer part number: 1000003688
Manufacturers: DIGIPRINT , Roland
Reviews
There are no reviews yet.