Description
A wide range of Epson I3200/I1600 printhead-based DTF printers can use this generic capping unit. The inlets for the capping fit ink tubes with an inner diameter of 2 mm. To connect to ink tubes with an inner diameter of 3 millimeters, the connector DC-2/20 must be added. When replacing the printhead, we recommend changing the capping units. One capping unit is required for each head. Please refer to the images to determine which capping will fit your printer. The list of related products at the bottom of this page includes additional cappings that are also suitable for DTF printers.
BELT,150S2M2999LW-C – 1000000395
$1,671.56This product has been discontinued by the manufacturer. Please scroll down for more information below.
SKU: 1000000395
Manufacturer part number: 1000000395
Manufacturer: Roland
JV3 X-Motor Coupling – M203635
$24.55This X-Motor coupling is suitable for Mimaki JV3 series printers. This is the first Mimaki part, part number M203635.
SKU: M203635
Manufacturer part number: M203635
Manufacturer: Mimaki
Fitting for G638W 2X6 (3pcs)
$105.30This set of 3 fittings is suitable for EFI Vutek H2000.
SKU: PADVUG68W
Manufacturer: DIGIPRINT
Roland BELT,50S2M250LW-C – 1000015988
$163.16This product has been discontinued by the manufacturer. Please continue reading for additional details.
SKU: 1000015988
Manufacturer part number: 1000015988
Manufacturer: Roland
S120 Carriage Belt – 990.0346.02
$75.69The Secabo S120 cutting plotters can use this carriage belt. This is the original Secabo part (number 990.0346.02). This carriage belt is 9 mm wide and 2813 mm long.
SKU: 990.0346.02
Manufacturer part number: 990.0346.02
Manufacturer: Secabo
CJ-70 Cap, Bottle PMP – 7520501000
$76.68This Cap, Bottle PMP is suitable for Roland printers.
SKU: 7520501000
Manufacturer part number: 7520501000
Manufacturer: Roland
Related Products
CJV300 Timing Belt – 100S2M210
$28.83Printers in the CJV300, CJV150, JV150, and JV300 series can use this timing belt.
SKU: 10379
Manufacturer part number: 100S2M210
Manufacturer: Mimaki
QEH15CA L-Bearing (Block only)
$238.90Various Roland and Mimaki printers are compatible with this bearing block, QEH15CA.
SKU: QEH15CA
Manufacturer part number: QEH15CA
Manufacturers: Roland , Mimaki
VJ-1604 Bearing – KY-14620
$4.57Mutoh Valuejet 1604 printers can use this generic bearing.
SKU: PMEMUVJ002O
Manufacturer part number: KY-14620
Manufacturers: DIGIPRINT , Mutoh
REX-62 Connector 30P Cable – ECARC02-0005
$51.47This 30 pins connecting cable is suitable for DGI REX-62, VT and VTII series printers. This is the original DGI part (number ECARC02-0005 replacing number 1356067). It measures 1.83m long and connects from the main board to the connector board. Printer compatibility DGI REX-62 DGI VT-100D DGI VT-130D DGI VT-62 DGI VT-92 DGI VTII-62 DGI […]
JV3 Y Timing Belt – 150 S2M 380G
$11.39Mimaki JV3, JV33, and JV5 series printers are compatible with this generic speed reduction belt.
SKU: PBEMIJV305O
Manufacturer part number: 150 S2M 380G
Manufacturer: DIGIPRINT
VJ-1608HS CR Deceleration Belt Assy – DG-42458
$52.86Mutoh VJ-1608HS printers can use this generic CR Deceleration Belt Assy.
SKU: 011011
Manufacturer part number: DG-42458
Manufacturers: DIGIPRINT , Mutoh
Reviews
There are no reviews yet.