Description
A wide range of Epson I3200/I1600 printhead-based DTF printers can use this generic capping unit. The inlets for the capping fit ink tubes with an inner diameter of 2 mm. To connect to ink tubes with an inner diameter of 3 millimeters, the connector DC-2/20 must be added. When replacing the printhead, we recommend changing the capping units. One capping unit is required for each head. Please refer to the images to determine which capping will fit your printer. The list of related products at the bottom of this page includes additional cappings that are also suitable for DTF printers.
CONNECTOR,SUPPLAY SECTION LPLUG31 – 1000021812
$62.41This original Roland component, the CONNECTOR, SUPPLAY SECTION LPLUG31, is compatible with a specific line of Roland printers.
SKU: 1000021812
Manufacturer part number: 1000021812
Manufacturer: Roland
JV4-160 S3M Carriage Belt – M800572
$580.56This carriage belt is suitable for Mimaki JV4 160 printers. This is the original Mimaki part (number M800572). This carriage belt is 527.5cm long and 1.5cm wide.
SKU: M800572
Manufacturer part number: M800572
Manufacturer: Mimaki
Colorpainter 100S Capping Unit (100) – U00097303400
$4,020.82This product has been discontinued by the manufacturer. Please continue reading for additional details.
SKU: U00097303400
Manufacturer part number: U00097303400
Manufacturer: Oki
Roland ADAPTER,UT8 – 1000005121
$100.33The manufacturer has discontinued this product. Please continue reading for additional details.
SKU: 1000005121
Manufacturer part number: 1000005121
Manufacturer: Roland
Jeti Jason Toothed Timing Belt – 615-424800
$121.79This original Jason toothed timing belt is suitable for Agfa Gandinnovations Jeti 5000 and 5024 Solvent printers. The belt has a circumference of 424 millimeters and a width of 20 millimeters and can withstand temperatures of -20 to 100 degrees Celsius. This is the original Agfa / Gandinnovations part (number 615-424800).
SKU: HTD 424-8M
Manufacturer part number: 615-424800
Manufacturer: Agfa
MJ-3204 Fitting KJL06-01S – CAPSM01-0006
$19.51The DGI MegaJet MJ-3204 / MegaJet MJ-3206 and PolaJet series printers are compatible with this fitting, KJL06-01S.
SKU: KQ2L06-01NS
Manufacturer part number: CAPSM01-0006
Manufacturer: DGI
Related Products
JV33 Y Drive Belt – M800982
$254.72This product has been discontinued by the manufacturer. Please continue reading for additional details.
SKU: M800982
Manufacturer part number: M800982
Manufacturer: Mimaki
REX-62 Connector 30P Cable – ECARC02-0005
$51.47This 30 pins connecting cable is suitable for DGI REX-62, VT and VTII series printers. This is the original DGI part (number ECARC02-0005 replacing number 1356067). It measures 1.83m long and connects from the main board to the connector board. Printer compatibility DGI REX-62 DGI VT-100D DGI VT-130D DGI VT-62 DGI VT-92 DGI VTII-62 DGI […]
JV33 Y Drive Belt – M800982
$163.41Mimaki JV33 printers are compatible with this generic Y drive belt, which is also known as a carriage belt.
SKU: PBEMIJV3301S
Manufacturer part number: M800982
Manufacturers: Mimaki , DIGIPRINT
VJ-1604 CR Speed Reduction Belt – DF-43940
$56.70Mutoh Valuejet 1604 printers are compatible with this CR speed reduction belt. The original Mutoh component (DF-43940) can be found here. The circumference of this 10-millimeter-wide CR speed reduction belt is 240 millimeters.
SKU: PBEMUVJ6002
Manufacturer part number: DF-43940
Manufacturer: Mutoh
QEH15SA L-Bearing (Block only)
$168.63Various Roland and Mimaki printers are compatible with this bearing block, QEH15SA.
SKU: QEH15SA
Manufacturer part number: QEH15SA
Manufacturers: Roland , Mimaki
QEH15CA L-Bearing (Block only)
$238.90Various Roland and Mimaki printers are compatible with this bearing block, QEH15CA.
SKU: QEH15CA
Manufacturer part number: QEH15CA
Manufacturers: Roland , Mimaki
Reviews
There are no reviews yet.