Description
A wide range of Epson I3200/I1600 printhead-based DTF printers can use this generic capping unit. The inlets for the capping fit ink tubes with an inner diameter of 2 mm. To connect to ink tubes with an inner diameter of 3 millimeters, the connector DC-2/20 must be added. When replacing the printhead, we recommend changing the capping units. One capping unit is required for each head. Please refer to the images to determine which capping will fit your printer. The list of related products at the bottom of this page includes additional cappings that are also suitable for DTF printers.
Epson L1800 capping unit (2pcs)
$116.64This generic capping unit set is suitable for a wide range of Epson L1800 printhead based DTF printers.
SKU: PCAEP3900
Manufacturer part number: F173090
Manufacturer: Epson
QS Series FS Kit, Purge Wiper, Suction Block – 45066759
$273.19This PURGE WIPER, SUCTION BLOCK is suitable for VUTEk QS series printers.
SKU: 45066759
Manufacturer part number: 45066759
Manufacturer: EFI
Straight Through Tube Fitting ID Tubing 3.2mm Nylon White (20 pcs)
$86.87This set of twenty straight through tube fittings made of white nylon that resist solvents is compatible with all wide format inkjet printers.
SKU: CC-1/20
Manufacturer: DIGIPRINT
RS-540 Carton, Accessory – 1000004727
$64.60This product has been discontinued by the manufacturer. Please continue reading for additional details.
SKU: 1000004727
Manufacturer part number: 1000004727
Manufacturer: Roland
Rockhopper 3 Steel Belt 64 – DF-42874
$218.67This generic steel belt of 64 inches is suitable for Mutoh Rockhopper 3 65 and Spitfire 65 printers. This is a high quality generic belt that corresponds to Mutoh part number DF-42874). This belt is 4750mm long and 25mm wide.
SKU: PBEMURH001O
Manufacturer part number: DF-42874
Manufacturers: DIGIPRINT , Mutoh
BELT,150S2M3768LW-C – 1000000889
$1,337.26This product has been discontinued by the manufacturer. Please scroll down for more information below.
SKU: 1000000889
Manufacturer part number: 1000000889
Manufacturer: Roland
Related Products
QEH15CA L-Bearing (Block only)
$238.90Various Roland and Mimaki printers are compatible with this bearing block, QEH15CA.
SKU: QEH15CA
Manufacturer part number: QEH15CA
Manufacturers: Roland , Mimaki
CJV300 Timing Belt – 100S2M210
$28.83Printers in the CJV300, CJV150, JV150, and JV300 series can use this timing belt.
SKU: 10379
Manufacturer part number: 100S2M210
Manufacturer: Mimaki
JV33 Y Drive Belt – M800982
$163.41Mimaki JV33 printers are compatible with this generic Y drive belt, which is also known as a carriage belt.
SKU: PBEMIJV3301S
Manufacturer part number: M800982
Manufacturers: Mimaki , DIGIPRINT
REX-62 Connector 30P Cable – ECARC02-0005
$51.47This 30 pins connecting cable is suitable for DGI REX-62, VT and VTII series printers. This is the original DGI part (number ECARC02-0005 replacing number 1356067). It measures 1.83m long and connects from the main board to the connector board. Printer compatibility DGI REX-62 DGI VT-100D DGI VT-130D DGI VT-62 DGI VT-92 DGI VTII-62 DGI […]
AJ-1000 Assy, Main Board – 1000000559
$3,431.37This Assy, Main Board is suitable for Roland AJ-1000 printers. This is the original Roland part (number 1000000559). Printer compatibility Roland AJ-1000 Roland AJ-1000i Roland AJ-740 Roland AJ-740i Product specifications Type Main Boards
XJ-640 Belt,150S2M2754LW-C – 1000003688
$644.02Roland XJ-640 printers can use this generic belt.
SKU: PBEROXJ6001O
Manufacturer part number: 1000003688
Manufacturers: DIGIPRINT , Roland
Reviews
There are no reviews yet.