Description
A wide range of Epson I3200/I1600 printhead-based DTF printers can use this generic capping unit. The inlets for the capping fit ink tubes with an inner diameter of 2 mm. To connect to ink tubes with an inner diameter of 3 millimeters, the connector DC-2/20 must be added. When replacing the printhead, we recommend changing the capping units. One capping unit is required for each head. Please refer to the images to determine which capping will fit your printer. The list of related products at the bottom of this page includes additional cappings that are also suitable for DTF printers.
Straight Through Tube Fitting 4.0mm and 3.2mm (20 pcs)
$83.40This set of 20 solvent resistant black nylon straight through reduction fitting is suitable for all wide format inkjet printers printers.
SKU: 3040-2/20
Manufacturer: DIGIPRINT
SX-8 BELT,B248MXL4.8 – 21925123
$34.61Roland SX-8 printers are compatible with this BELT,B248MXL4.8. The original Roland part (number 21925123) is here.
SKU: 21925123
Manufacturer part number: 21925123
Manufacturer: Roland
Jetrix Male Luer Integral Lock Ring to Female Luer Thread Style Plug (20 pcs) – 00-AN00-89
$86.87For the Inktec Jetrix 3015FQ and 2513FRQ printers, this set of 20 Male Luer Integral Lock Ring to Female Luer Thread Style Plug is appropriate.
SKU: LP34-1/20
Manufacturer part number: 00-AN00-89
Manufacturer: Inktec
XF-640 Carton, Sleeve – 1000010334
$365.64This product has been discontinued by the manufacturer. Please scroll down for more information below.
SKU: 1000010334
Manufacturer part number: 1000010334
Manufacturer: Roland
RJ-8000 Ink ID Board Assy – DF-43968
$131.58This Ink ID Board Assy (Smart Chip reader) is suitable for Mutoh RJ-8000 (Falcon II) printers.
SKU: DF-43968
Manufacturer part number: DF-43968
Manufacturer: Mutoh
CJ-540 Belt,166P2M4-530 – 21925137
$17.97Roland CJ-540 printers can use this generic belt.
SKU: 008006
Manufacturer part number: 21925137
Manufacturers: Roland , DIGIPRINT
Related Products
AJ-1000 Assy, Main Board – 1000000559
$3,431.37This Assy, Main Board is suitable for Roland AJ-1000 printers. This is the original Roland part (number 1000000559). Printer compatibility Roland AJ-1000 Roland AJ-1000i Roland AJ-740 Roland AJ-740i Product specifications Type Main Boards
VJ-1604 Steel Belt – DF-43937
$156.19Mutoh Valuejet 1604 printers are compatible with this generic, high-quality Steel Belt. This is the same generic part as the Mutoh part (DF-43937). This belt is 25 mm wide and 4750 mm long. Part number PBEMUVJ6001 is also available for the original Mutoh belt.
SKU: PBEMU13975
Manufacturer part number: DF-43937
Manufacturers: DIGIPRINT , Mutoh
VP-540 L-Bearing, SSR15XW1GGE (Block only)
$302.13Several Roland printers are compatible with this bearing block, SSR15XW1GGE (see compatibility list below).
SKU: SSR 15 X W SS G
Manufacturer part number: 1000002145
Manufacturer: Roland
CG1107 Assy, Main Board – 6000003126
$1,845.96This Assy, Main Board is suitable for Roland printers. This is the original Roland part (number 6000003126). Printer compatibility Roland GR-540 Roland GR-640 Roland GR-420 Product specifications Type Main Boards
SummaSign BELT X-MOTOR 110T,W=0.25 – MB9124
$28.83Summa SummaSign cutters are compatible with this BELT X-MOTOR 110T, W=0.25.
SKU: 007828
Manufacturer part number: MB9124
Manufacturer: Summa
JV3 Y Timing Belt – 150 S2M 380G
$11.39Mimaki JV3, JV33, and JV5 series printers are compatible with this generic speed reduction belt.
SKU: PBEMIJV305O
Manufacturer part number: 150 S2M 380G
Manufacturer: DIGIPRINT
Reviews
There are no reviews yet.