Description
A wide range of Epson XP600/TX800 printhead-based DTF printers can use this generic capping unit. The capping inlets fit ink tubes of an inner diameter of 2mm. To connect to ink tubes with an inner diameter of 3 millimeters, the connector DC-2/20 must be added. We recommend changing the capping units when replacing the printhead. One capping unit is required for each head. Please refer to the images to determine which capping will fit your printer. The list of related products at the bottom of this page includes additional cappings that are also suitable for DTF printers.
SJ-1000 ASSY,TU L BEARING – 22805523
$34.27Roland SJ-1000 printers are compatible with this ASSY,TU L BEARING. The original Roland part (number 22805523) is here.
SKU: 22805523
Manufacturer part number: 22805523
Manufacturer: Roland
VS-300i Belt, 100S2M1554Lw-C – 1000010645
$504.00This Belt, 100S2M1554Lw-C is suitable for Roland VS-300i printers.
SKU: 1000010645
Manufacturer part number: 1000010645
Manufacturer: Roland
This solvent resistant connector helps connects two tubes (ID: 3mm, OD: 4mm) together.
$15.08This solvent resistant connector helps connects two tubes (ID: 3mm, OD: 4mm) together.
SKU: PCNDI8745
Manufacturers: DIGIPRINT , Mutoh , Roland , Mimaki
TX400-1800 Y Drive Belt 24-180T – M801167
$901.94Mimaki TX400-1800 printers are compatible with this Y Drive Belt 24-180T.
SKU: M801167
Manufacturer part number: M801167
Manufacturer: Mimaki
RS-640 Carton, Pipe Feeder Shaft – 1000004762
$47.38This product has been discontinued by the manufacturer. Please scroll down for more information below.
SKU: 1000004762
Manufacturer part number: 1000004762
Manufacturer: Roland
Marabu ClearShield Classic – 20L, Gloss
$1,045.79Marabu Clearshield® Classic is a high-viscosity water-based liquid coating for enhanced UV-protection, chemical and abrasion resistance. For use on most non-water sensitive materials. can be applied by hand using a brush or roller. Of all the formulations, ClearShield Classic has the highest film build. It works well for banners, vinyl, and vertical applications.
SKU: 360299911
Manufacturer part number: 360299911
Manufacturer: Marabu
Related Products
S Class 75 KIT FLATCABLES S75T – 395-403
$240.67This KIT FLATCABLES S75T is suitable for Summa S Class 75 cutters. This is the original Summa part (number 395-403).
Printer compatibility
Summa S-Class-75-T-Series
VJ-1608HS CR Deceleration Belt Assy – DG-42458
$52.86Mutoh VJ-1608HS printers can use this generic CR Deceleration Belt Assy.
SKU: 011011
Manufacturer part number: DG-42458
Manufacturers: DIGIPRINT , Mutoh
JV33 Y Drive Belt – M800982
$163.41Mimaki JV33 printers are compatible with this generic Y drive belt, which is also known as a carriage belt.
SKU: PBEMIJV3301S
Manufacturer part number: M800982
Manufacturers: Mimaki , DIGIPRINT
Summa S Class Kit S(2) 120 Flat Cable – KIT-2030
$416.04This KIT FLATCABLES S120T is suitable for Summa S Class 12 cutters. This is the original Summa part (replacing part number 395-405).
Printer compatibility
Summa S-Class-120-T-Series
SummaSign BELT X-MOTOR 110T,W=0.25 – MB9124
$28.83Summa SummaSign cutters are compatible with this BELT X-MOTOR 110T, W=0.25.
SKU: 007828
Manufacturer part number: MB9124
Manufacturer: Summa
CG1107 Assy, Main Board – 6000003126
$1,845.96This Assy, Main Board is suitable for Roland printers. This is the original Roland part (number 6000003126). Printer compatibility Roland GR-540 Roland GR-640 Roland GR-420 Product specifications Type Main Boards
Reviews
There are no reviews yet.