Description
A wide range of Epson XP600/TX800 printhead-based DTF printers can use this generic capping unit. The capping inlets fit ink tubes of an inner diameter of 2mm. To connect to ink tubes with an inner diameter of 3 millimeters, the connector DC-2/20 must be added. We recommend changing the capping units when replacing the printhead. One capping unit is required for each head. Please refer to the images to determine which capping will fit your printer. The list of related products at the bottom of this page includes additional cappings that are also suitable for DTF printers.
UltraVu II 3360 Belt Timing HTD5 34.0FT – P5183-34.0
$1,622.25EFI VUTEk UltraVu II 3360 and QS series printers are compatible with this 34-foot-long timing belt.
SKU: P5183-34.0
Manufacturer part number: P5183-34.0
Manufacturer: EFI
Marabu ClearShield Classic – 20L, Gloss
$1,045.79Marabu Clearshield® Classic is a high-viscosity water-based liquid coating for enhanced UV-protection, chemical and abrasion resistance. For use on most non-water sensitive materials. can be applied by hand using a brush or roller. Of all the formulations, ClearShield Classic has the highest film build. It works well for banners, vinyl, and vertical applications.
SKU: 360299911
Manufacturer part number: 360299911
Manufacturer: Marabu
I Fitting Assy – DH-40849
$179.67This I Fitting Assy is a genuine Mutoh component that works with certain Mutoh printer models.
SKU: DH-40849
Manufacturer part number: DH-40849
Manufacturer: Mutoh
TS500 Cap Rubber G540F – M700682
$77.06For Mimaki printers, this TS500 Cap Rubber G540F – M700682 is suitable.
SKU: M700682
Manufacturer part number: M700682
Manufacturer: Mimaki
Roland ADAPTER,PLLJ6 – 1000001786
$110.25The manufacturer has discontinued this product. Please continue reading for additional details.
SKU: 1000001786
Manufacturer part number: 1000001786
Manufacturer: Roland
VJ-1608HS CR Deceleration Belt Assy – DG-42458
$52.86Mutoh VJ-1608HS printers can use this generic CR Deceleration Belt Assy.
SKU: 011011
Manufacturer part number: DG-42458
Manufacturers: DIGIPRINT , Mutoh
Related Products
JV33 Y Drive Belt – M800982
$163.41Mimaki JV33 printers are compatible with this generic Y drive belt, which is also known as a carriage belt.
SKU: PBEMIJV3301S
Manufacturer part number: M800982
Manufacturers: Mimaki , DIGIPRINT
JV5 Bearing – F699ZZ
$4.93Mimaki JV5, JV33, and UJF-3042 printers are compatible with this generic bearing.
SKU: PMEMI18835
Manufacturer part number: F699ZZ
Manufacturers: Mimaki , DIGIPRINT
VJ-1604 Steel Belt – DF-43937
$156.19Mutoh Valuejet 1604 printers are compatible with this generic, high-quality Steel Belt. This is the same generic part as the Mutoh part (DF-43937). This belt is 25 mm wide and 4750 mm long. Part number PBEMUVJ6001 is also available for the original Mutoh belt.
SKU: PBEMU13975
Manufacturer part number: DF-43937
Manufacturers: DIGIPRINT , Mutoh
XJ-640 Belt,150S2M2754LW-C – 1000003688
$644.02Roland XJ-640 printers can use this generic belt.
SKU: PBEROXJ6001O
Manufacturer part number: 1000003688
Manufacturers: DIGIPRINT , Roland
QEH15SA L-Bearing (Block only)
$168.63Various Roland and Mimaki printers are compatible with this bearing block, QEH15SA.
SKU: QEH15SA
Manufacturer part number: QEH15SA
Manufacturers: Roland , Mimaki
AJ-1000 Assy, Pinch Org Board – W700105720
$69.44This Assy, Pinch Org Board is suitable for Roland AJ-1000 printers. This is the original Roland part (number W700105720).
Printer compatibility
Roland AJ-1000
Roland AJ-1000i
Roland AJ-740
Roland AJ-740i
Product specifications
Reviews
There are no reviews yet.