Description
A wide range of Epson XP600/TX800 printhead-based DTF printers can use this generic capping unit. The capping inlets fit ink tubes of an inner diameter of 2mm. To connect to ink tubes with an inner diameter of 3 millimeters, the connector DC-2/20 must be added. We recommend changing the capping units when replacing the printhead. One capping unit is required for each head. Please refer to the images to determine which capping will fit your printer. The list of related products at the bottom of this page includes additional cappings that are also suitable for DTF printers.
ST-1806 Sub Solution Tank Assy – ABOX-NKB0001
$849.50This sub solution tank assembly is suitable for DGI SaturnJet ST-1806 printers. The original DGI component (number ABOX-NKB0001) is here.
SKU: ABOX-NKB0001
Manufacturer part number: ABOX-NKB0001
Manufacturer: DGI
FP-740 Carton, Rail Slider TU-750 – 22605116
$16.02This product has been discontinued by the manufacturer. Please scroll down for more information below.
SKU: 22605116
Manufacturer part number: 22605116
Manufacturer: Roland
VP-540 L-Bearing, SSR15XW1GGE/W2GE +2050L – 1000002145
$4,371.49Roland VP-540 printers can use this L Bearing.
SKU: 1000002145
Manufacturer part number: 1000002145
Manufacturer: Roland
VG-640 Assy, Cap Top – 6000002332
$198.33For Roland printers, this VG-640 Assy, Cap Top – 6000002332 is suitable.
SKU: PCARO81948O
Manufacturer part number: 6000002332
Manufacturers: DIGIPRINT , Roland
JF-1631 Linear Way – MES20C2R3700
$2,991.72This linear approach works well with Mimaki JF-1631 printers. This is the original Mimaki part (number MES20C2R3700). This linear path has two blocks and is 3700mm long.
SKU: MES20C2R3700
Manufacturer part number: MES20C2R1480
Manufacturer: Mimaki
DIGIMEDIA Monomeric Gloss Overlaminate – 1600 mm x 50 m (63″ x 164′)
$277.82High-quality, self-adhesive 70 clear monomeric vinyl with UV protection and an acrylic-based, high-tack, permanent adhesive. This competitive calendered vinyl, which comes in gloss and matte finishes, is an excellent lamination for protecting digitally printed images. Easy to clean, this film can also be used as anti-graffiti protection. As low as €1.05 per square meter
SKU: DLMG63
Manufacturer part number: DLMG63
Distributor: DIGIPRINT
Related Products
S Class 75 KIT FLATCABLES S75T – 395-403
$240.67This KIT FLATCABLES S75T is suitable for Summa S Class 75 cutters. This is the original Summa part (number 395-403).
Printer compatibility
Summa S-Class-75-T-Series
CJV300 Timing Belt – 100S2M210
$28.83Printers in the CJV300, CJV150, JV150, and JV300 series can use this timing belt.
SKU: 10379
Manufacturer part number: 100S2M210
Manufacturer: Mimaki
Summa S Class Kit S(2) 120 Flat Cable – KIT-2030
$416.04This KIT FLATCABLES S120T is suitable for Summa S Class 12 cutters. This is the original Summa part (replacing part number 395-405).
Printer compatibility
Summa S-Class-120-T-Series
QEH15SA L-Bearing (Block only)
$168.63Various Roland and Mimaki printers are compatible with this bearing block, QEH15SA.
SKU: QEH15SA
Manufacturer part number: QEH15SA
Manufacturers: Roland , Mimaki
JV3 Y Timing Belt – 150 S2M 380G
$11.39Mimaki JV3, JV33, and JV5 series printers are compatible with this generic speed reduction belt.
SKU: PBEMIJV305O
Manufacturer part number: 150 S2M 380G
Manufacturer: DIGIPRINT
Carriage Drive Timing Belt
$182.62Specific printers can use this carriage drive timing belt.
SKU: 88S3M312
Manufacturer: DIGIPRINT
Reviews
There are no reviews yet.