Description
A wide range of Epson XP600/TX800 printhead-based DTF printers can use this generic capping unit. The capping inlets fit ink tubes of an inner diameter of 2mm. To connect to ink tubes with an inner diameter of 3 millimeters, the connector DC-2/20 must be added. We recommend changing the capping units when replacing the printhead. One capping unit is required for each head. Please refer to the images to determine which capping will fit your printer. The list of related products at the bottom of this page includes additional cappings that are also suitable for DTF printers.
VJ-1204 L Type Fitting Waste (20 pcs) – DG-41175
$253.43The Mutoh VJ-1204 printers are compatible with this L-Type Fitting Waste.
SKU: GZ-06285-40
Manufacturer part number: GZ-06285-40
Manufacturer: Mutoh
UJF-3042 Cap rubber R – M700652
$154.11Mimaki printers can use this UJF-3042 Cap rubber R – M700652.
SKU: M700652
Manufacturer part number: M700652
Manufacturer: Mimaki
Steel Belt Assy – DG-49266
$121.12A specific line of Mutoh printers can use this standard steel belt.
SKU: PBEMU4926
Manufacturer part number: DG-49266
Manufacturers: Mutoh , DIGIPRINT
Straight Through Tube Fitting ID Tubing 3.2mm Nylon Black (20 pcs)
$86.87This set of 20 solvent resistant black nylon straight through tube fitting is suitable for all wide format inkjet printers printers.
SKU: CC-2/20
Manufacturer: DIGIPRINT
VS-420 Belt, 150S2M1539LW-C – 1000007235
$56.38Roland VS-420 printers can use this generic belt. The Roland part number 1000007235 is matched by this generic component. This belt is 15 mm wide and 3078 mm long.
SKU: PBERO12359O
Manufacturer part number: 1000007235
Manufacturers: DIGIPRINT , Roland
UJF-3042 Fitting Assy – M010328
$84.38The Mimaki UJF-3042, UJF-3042HG, and UJF-3042FX printers can use this Fitting Assy.
SKU: M010328
Manufacturer part number: M010328
Manufacturer: Mimaki
Related Products
CJ-540 Belt, 408P2M4-530 – 11929138
$16.00Roland CJ-540 printers are compatible with this generic belt, 408P2M4-530.
SKU: 008055
Manufacturer part number: 11929138
Manufacturers: Roland , DIGIPRINT
S Class 75 KIT FLATCABLES S75T – 395-403
$240.67This KIT FLATCABLES S75T is suitable for Summa S Class 75 cutters. This is the original Summa part (number 395-403).
Printer compatibility
Summa S-Class-75-T-Series
SJ-740 L-Bearing SSR15XW1UUE – 21895153 (Block only)
$306.56For some Roland printers, this generic bearing block, SSR15XW1UUE, is suitable.
SKU: PMERO17713
Manufacturer part number: 21895154
Manufacturers: Roland , DIGIPRINT
CJV300 Timing Belt – 100S2M210
$28.83Printers in the CJV300, CJV150, JV150, and JV300 series can use this timing belt.
SKU: 10379
Manufacturer part number: 100S2M210
Manufacturer: Mimaki
AJ-1000 Assy, Main Board – 1000000559
$3,431.37This Assy, Main Board is suitable for Roland AJ-1000 printers. This is the original Roland part (number 1000000559). Printer compatibility Roland AJ-1000 Roland AJ-1000i Roland AJ-740 Roland AJ-740i Product specifications Type Main Boards
REX-62 Connector 30P Cable – ECARC02-0005
$51.47This 30 pins connecting cable is suitable for DGI REX-62, VT and VTII series printers. This is the original DGI part (number ECARC02-0005 replacing number 1356067). It measures 1.83m long and connects from the main board to the connector board. Printer compatibility DGI REX-62 DGI VT-100D DGI VT-130D DGI VT-62 DGI VT-92 DGI VTII-62 DGI […]
Reviews
There are no reviews yet.