Description
A wide range of Epson XP600/TX800 printhead-based DTF printers can use this generic capping unit. The capping inlets fit ink tubes of an inner diameter of 2mm. To connect to ink tubes with an inner diameter of 3 millimeters, the connector DC-2/20 must be added. We recommend changing the capping units when replacing the printhead. One capping unit is required for each head. Please refer to the images to determine which capping will fit your printer. The list of related products at the bottom of this page includes additional cappings that are also suitable for DTF printers.
Marabu ClearShield Classic – 20L, Gloss
$1,045.79Marabu Clearshield® Classic is a high-viscosity water-based liquid coating for enhanced UV-protection, chemical and abrasion resistance. For use on most non-water sensitive materials. can be applied by hand using a brush or roller. Of all the formulations, ClearShield Classic has the highest film build. It works well for banners, vinyl, and vertical applications.
SKU: 360299911
Manufacturer part number: 360299911
Manufacturer: Marabu
Roland BELT,1242P2M6-530 – 11929129
$101.79This product has been discontinued by the manufacturer. Please continue reading for additional details.
SKU: 11929129
Manufacturer part number: 11929129
Manufacturer: Roland
Roland CONNECTOR DUSB-BRD42-T12 – 13369193
$33.20The manufacturer has discontinued this product. Please continue reading for additional details.
SKU: 13369193
Manufacturer part number: 13369193
Manufacturer: Roland
CONNECTOR,SUPPLAY SECTION LF4131 – 1000021808
$39.69This original Roland component, the CONNECTOR, SUPPLAY SECTION LF4131, is suitable for a specific line of Roland printers.
SKU: 1000021808
Manufacturer part number: 1000021808
Manufacturer: Roland
Roland BELT,576P2M6 530 – 11929151
$93.03This product has been discontinued by the manufacturer. Please continue reading for additional details.
SKU: 11929151
Manufacturer part number: 11929151
Manufacturer: Roland
Straight Through Reduction Tube Fitting ID Tubing 3.2mm to 2.4mm Nylon Black (20 pcs)
$87.67This set of 20 solvent resistant black nylon straight through tube fitting is suitable for all wide format inkjet printers printers.
SKU: DC-2/20
Manufacturer: DIGIPRINT
Related Products
SummaSign BELT Y-MOTOR 150T – MB0380
$20.91Summa SummaSign cutters are compatible with this BELT Y-MOTOR 150T.
SKU: 004612
Manufacturer part number: MB0380
Manufacturer: Summa
JV3 Y Timing Belt – 150 S2M 380G
$14.42Mimaki JV3, JV33, and JV5 series printers can use this generic speed reduction belt.
SKU: S2M-380-15MM
Manufacturer part number: 150 S2M 380G
Manufacturers: Mimaki , DIGIPRINT
SJ-740 L-Bearing SSR15XW1UUE – 21895153 (Block only)
$306.56For some Roland printers, this generic bearing block, SSR15XW1UUE, is suitable.
SKU: PMERO17713
Manufacturer part number: 21895154
Manufacturers: Roland , DIGIPRINT
JV33 Y Drive Belt – M800982
$163.41Mimaki JV33 printers are compatible with this generic Y drive belt, which is also known as a carriage belt.
SKU: PBEMIJV3301S
Manufacturer part number: M800982
Manufacturers: Mimaki , DIGIPRINT
VJ-1604 Steel Belt – DF-43937
$156.19Mutoh Valuejet 1604 printers are compatible with this generic, high-quality Steel Belt. This is the same generic part as the Mutoh part (DF-43937). This belt is 25 mm wide and 4750 mm long. Part number PBEMUVJ6001 is also available for the original Mutoh belt.
SKU: PBEMU13975
Manufacturer part number: DF-43937
Manufacturers: DIGIPRINT , Mutoh
REX-62 Connector 30P Cable – ECARC02-0005
$51.47This 30 pins connecting cable is suitable for DGI REX-62, VT and VTII series printers. This is the original DGI part (number ECARC02-0005 replacing number 1356067). It measures 1.83m long and connects from the main board to the connector board. Printer compatibility DGI REX-62 DGI VT-100D DGI VT-130D DGI VT-62 DGI VT-92 DGI VTII-62 DGI […]
Reviews
There are no reviews yet.