Description
A wide range of Epson XP600/TX800 printhead-based DTF printers can use this generic capping unit. The capping inlets fit ink tubes of an inner diameter of 2mm. To connect to ink tubes with an inner diameter of 3 millimeters, the connector DC-2/20 must be added. We recommend changing the capping units when replacing the printhead. One capping unit is required for each head. Please refer to the images to determine which capping will fit your printer. The list of related products at the bottom of this page includes additional cappings that are also suitable for DTF printers.
Roland BELT,BANKORAN MARU 4*285 – 11929119
$113.55This product has been discontinued by the manufacturer. Please continue reading for additional details.
SKU: 11929119
Manufacturer part number: 11929119
Manufacturer: Roland
Marabu Clearshield® Classic Lite – 5L – Semi-Gloss
$306.08Marabu Clearshield® Classic is a water-based liquid coating with a low viscosity that provides enhanced UV protection as well as chemical and abrasion resistance. can be applied with a brush, roller, or automated spray equipment or by hand. If you’re looking for a laminate with a lower viscosity, Classic Lite is an option that provides the same excellent protection as ClearShield Classic.
SKU: 360298812
Manufacturer part number: 360298812
Manufacturer: Marabu
RJ-8000 Ink ID Board Assy – DF-43968
$131.58This Ink ID Board Assy (Smart Chip reader) is suitable for Mutoh RJ-8000 (Falcon II) printers.
SKU: DF-43968
Manufacturer part number: DF-43968
Manufacturer: Mutoh
Anapurna Mv Solution Bar – D2+7130209-0009
$5,211.65Agfa: Anapurna Mv and Dilli NEO Titan UVT-1606W printers can use this solution bar. This is the original Agfa oart (number D2+7130209-0009).
SKU: D2+7130209-0009
Manufacturer part number: D2+7130209-0009
Manufacturer: Agfa
SP-300 ADAPTER,MEDIA CLAMP – 21905185
$10.89The manufacturer has discontinued this product. Please continue reading for additional details.
SKU: 21905185
Manufacturer part number: 21905185
Manufacturer: Roland
Roland ADAPTER,KQ2E06-00A – 1000013741
$98.81The manufacturer has discontinued this product. Please continue reading for additional details.
SKU: 1000013741
Manufacturer part number: 1000013741
Manufacturer: Roland
Related Products
VJ-1604 CR Speed Reduction Belt – DF-43940
$56.70Mutoh Valuejet 1604 printers are compatible with this CR speed reduction belt. The original Mutoh component (DF-43940) can be found here. The circumference of this 10-millimeter-wide CR speed reduction belt is 240 millimeters.
SKU: PBEMUVJ6002
Manufacturer part number: DF-43940
Manufacturer: Mutoh
QEH15SA L-Bearing (Block only)
$168.63Various Roland and Mimaki printers are compatible with this bearing block, QEH15SA.
SKU: QEH15SA
Manufacturer part number: QEH15SA
Manufacturers: Roland , Mimaki
Summa S Class Kit S(2) 120 Flat Cable – KIT-2030
$416.04This KIT FLATCABLES S120T is suitable for Summa S Class 12 cutters. This is the original Summa part (replacing part number 395-405).
Printer compatibility
Summa S-Class-120-T-Series
VJ-1604 Steel Belt – DF-43937
$156.19Mutoh Valuejet 1604 printers are compatible with this generic, high-quality Steel Belt. This is the same generic part as the Mutoh part (DF-43937). This belt is 25 mm wide and 4750 mm long. Part number PBEMUVJ6001 is also available for the original Mutoh belt.
SKU: PBEMU13975
Manufacturer part number: DF-43937
Manufacturers: DIGIPRINT , Mutoh
CJV300 Timing Belt – 100S2M210
$28.83Printers in the CJV300, CJV150, JV150, and JV300 series can use this timing belt.
SKU: 10379
Manufacturer part number: 100S2M210
Manufacturer: Mimaki
REX-62 Connector 30P Cable – ECARC02-0005
$51.47This 30 pins connecting cable is suitable for DGI REX-62, VT and VTII series printers. This is the original DGI part (number ECARC02-0005 replacing number 1356067). It measures 1.83m long and connects from the main board to the connector board. Printer compatibility DGI REX-62 DGI VT-100D DGI VT-130D DGI VT-62 DGI VT-92 DGI VTII-62 DGI […]
Reviews
There are no reviews yet.