Description
A wide range of Epson XP600/TX800 printhead-based DTF printers can use this generic capping unit. The capping inlets fit ink tubes of an inner diameter of 2mm. To connect to ink tubes with an inner diameter of 3 millimeters, the connector DC-2/20 must be added. We recommend changing the capping units when replacing the printhead. One capping unit is required for each head. Please refer to the images to determine which capping will fit your printer. The list of related products at the bottom of this page includes additional cappings that are also suitable for DTF printers.
Straight Hose Tail Coupling 1/4″ – PMCD1704
$90.34For certain Starfire printhead-equipped printers, this Straight Hose Tail Coupling 1/4″ is appropriate.
SKU: PMCD1704
Manufacturer part number: PMCD1704
Manufacturer: DIGIPRINT
AJ-1000 COUPLING,SHAFT FEED – 1000000755
$19,974.08The manufacturer has discontinued this product. Please scroll down for more information below.
SKU: 1000000755
Manufacturer part number: 1000000755
Manufacturer: Roland
Anapurna M2050 Capping Pad Assy (8 pcs) – 7021240-0009
$441.30Agfa Anapurna M2050 printers are compatible with this set of eight capping Pad Assy.
SKU: 7021240-0009
Manufacturer part number: 7021240-0009
Manufacturer: Agfa
Steel Belt Assy – DG-49266
$121.12A specific line of Mutoh printers can use this standard steel belt.
SKU: PBEMU4926
Manufacturer part number: DG-49266
Manufacturers: Mutoh , DIGIPRINT
AJ-1000 Cap Top Set – 1000002081
$336.40The manufacturer has discontinued this product. Please scroll down for more information below.
SKU: 1000002081
Manufacturer part number: 1000002081
Manufacturer: Roland
Anapurna M Solution Bar – D2+7130209-0007
$4,096.38This solution bar is suitable for Agfa :Anapurna M printers. The original part from Agfa (number D2+7130209-0007) is here.
SKU: D2+7130209-0007
Manufacturer part number: D2+7130209-0007
Manufacturer: Agfa
Related Products
QEH15CA L-Bearing (Block only)
$238.90Various Roland and Mimaki printers are compatible with this bearing block, QEH15CA.
SKU: QEH15CA
Manufacturer part number: QEH15CA
Manufacturers: Roland , Mimaki
CJV300 Timing Belt – 100S2M210
$28.83Printers in the CJV300, CJV150, JV150, and JV300 series can use this timing belt.
SKU: 10379
Manufacturer part number: 100S2M210
Manufacturer: Mimaki
SJ-740 L-Bearing SSR15XW1UUE – 21895153 (Block only)
$306.56For some Roland printers, this generic bearing block, SSR15XW1UUE, is suitable.
SKU: PMERO17713
Manufacturer part number: 21895154
Manufacturers: Roland , DIGIPRINT
VJ-1604 CR Speed Reduction Belt – DF-43940
$56.70Mutoh Valuejet 1604 printers are compatible with this CR speed reduction belt. The original Mutoh component (DF-43940) can be found here. The circumference of this 10-millimeter-wide CR speed reduction belt is 240 millimeters.
SKU: PBEMUVJ6002
Manufacturer part number: DF-43940
Manufacturer: Mutoh
VJ-1604 Steel Belt – DF-43937
$156.19Mutoh Valuejet 1604 printers are compatible with this generic, high-quality Steel Belt. This is the same generic part as the Mutoh part (DF-43937). This belt is 25 mm wide and 4750 mm long. Part number PBEMUVJ6001 is also available for the original Mutoh belt.
SKU: PBEMU13975
Manufacturer part number: DF-43937
Manufacturers: DIGIPRINT , Mutoh
Summa S Class Kit S(2) 120 Flat Cable – KIT-2030
$416.04This KIT FLATCABLES S120T is suitable for Summa S Class 12 cutters. This is the original Summa part (replacing part number 395-405).
Printer compatibility
Summa S-Class-120-T-Series
Reviews
There are no reviews yet.