Description
This set of 3 fittings is suitable for EFI Vutek H2000 using 3M™ Liqui-Cel™ SP Series Membrane Contactor. One set of 3 fittings is needed for each degasser.
X-Rite i1 Basic Pro 3
$4,010.58
VJ-1604 Waste Liquid joint – DE-37081
$7.03Mutoh Valuejet 1604 printers can use this Waste Liquid joint. This is the original Mutoh part (number DE-37081).
SKU: DE-37081
Manufacturer part number: DE-37081
Manufacturer: Mutoh
UJF-7151 Cap Slider Assembly – M017352
$511.37Mimaki printers can use this UJF-7151 Cap Slider Assembly – M017352.
SKU: M017352
Manufacturer part number: M017352
Manufacturer: Mimaki
Jeti Jason Toothed Timing Belt – 615-960820
$162.40This original Jason toothed timing belt is suitable for Agfa Gandinnovations Jeti 5000 and 5024 Solvent printers. The belt is temperature resistant from -20 to 100°C, has a circumference of 960mm and a width of 20mm. This is the original Agfa / Gandinnovations part (number 615-960820).
SKU: HTD 960-8M
Manufacturer part number: 615-960820
Manufacturer: Agfa
Epson XP600 / TX800 capping unit
$42.02A wide range of Epson XP600/TX800 printhead-based DTF printers can use this generic capping unit.
SKU: PCAEPXP605
Manufacturers: Epson , DIGIPRINT
GS5000r Timing Belt HTD5 30mm 50m roll – 45085360
$1,292.86EFI VUTEk GS5000r printers can use this generic timing belt.
SKU: PBEVU83064OA
Manufacturer part number: 45085360
Manufacturer: DIGIPRINT
Related Products
VJ-1604 Bearing – KY-14620
$4.57Mutoh Valuejet 1604 printers can use this generic bearing.
SKU: PMEMUVJ002O
Manufacturer part number: KY-14620
Manufacturers: DIGIPRINT , Mutoh
XJ-640 Belt,150S2M2754LW-C – 1000003688
$644.02Roland XJ-640 printers can use this generic belt.
SKU: PBEROXJ6001O
Manufacturer part number: 1000003688
Manufacturers: DIGIPRINT , Roland
SJ-740 L-Bearing SSR15XW1UUE – 21895153 (Block only)
$306.56For some Roland printers, this generic bearing block, SSR15XW1UUE, is suitable.
SKU: PMERO17713
Manufacturer part number: 21895154
Manufacturers: Roland , DIGIPRINT
JV3 Y Timing Belt – 150 S2M 380G
$14.42Mimaki JV3, JV33, and JV5 series printers can use this generic speed reduction belt.
SKU: S2M-380-15MM
Manufacturer part number: 150 S2M 380G
Manufacturers: Mimaki , DIGIPRINT
JV33 Y Drive Belt – M800982
$163.41Mimaki JV33 printers are compatible with this generic Y drive belt, which is also known as a carriage belt.
SKU: PBEMIJV3301S
Manufacturer part number: M800982
Manufacturers: Mimaki , DIGIPRINT
CJV300 Timing Belt – 100S2M210
$28.83Printers in the CJV300, CJV150, JV150, and JV300 series can use this timing belt.
SKU: 10379
Manufacturer part number: 100S2M210
Manufacturer: Mimaki
Reviews
There are no reviews yet.